Viewing all customer Discussions for:

15-194 1" T-Lock Balance Shoe, Closed Cam

I am looking to order (4) S795-28 with a 28D stamp. I'll need the 15-198 Hook as well as the 15-194 T-Lock pivot shoe. Please let me know if you'll need any other information from me.

Looks like its 15-194, but just wanted to be correct before I ordered. Let me know if I can provide any other information. Thanks

Hello, I'm looking for this window balance.

Pella window circa 2007? These tilts I believe are missing a curved part that hooks on rod.

There was a sticker on top of window frame. It read 710 05130427. The window measures 39 3/4"x 52 3/4" . This is from a 2004 Fleetwood mobile home. One on each side. I need both.

Balance is 16 inches long by 9/16 by 9/16 string and hook come out at end of balance not able to take picture of it installed window is in a camp out of state in MaineI will be needing 2 of them

I had originally ordered 4 window balancers but the top was wrong and the bottom stops were too big for the channel. The first ones were 34" Series 795 Channel Balancers(S795-34) the pictures I am sending you are of the ones I need. They are 34B but slimmer channels. I would like to order 4 again. ... (cont.)

I would need channel 795 20B with a 15-194 1" T lock balance shoe and a 15-198 balance clip attachment.

I have four balancers to replace. Two are 32 and two are 33 inches 1/2 inch wide.. What do I need exactly? Would like to know the right balancers to order. Can't seem to match up the exact replacement.

I am needing to find a replacement for this. It is a 26'' window balance. The ones I previously ordered had the wrong size end. It was too large.

I need 2 of these. thank you

What do I need to order for replacements and the latch on the spring fits in a hole drilled in the sash.

Attached are 5 pictures showing my current latch. The latch is slightly bent due to the failure of the t-lock shoe, resulting in the release of the channel balance which then was restrained by the latch causing the bend.I determined the shoe to be 15-194.I have reviewed all the 2-5/8 latches of sim ... (cont.)

Need to replace the window pivot shoes for 20 windows. The current one is 1" and has a green insert piece. There are three sets of numbers on the back side AT 67900, 4610108, 0467479. See attached pictures.

I need several channel Balances. I do not see any with the hook type like I have. Would you be able to help me figure out what part I will need. The only number stamped are "26B BS1". I have 11 windows needing repaired. Thank you for your help!

I have checked numerous windows in my house and I have come to the conclusion that I need the following parts to replace my broken ones 26-243 Left Latch (x7) 26-244 Right Latch (x7) 26-360 Pivot Bar (x4) 15-194 Balance Shoe (x24) S795-34C Window Balance (x2) but I am going to need the 15-194 balan ... (cont.)

I need tilt out balances. These are marked 26CBSItl. They are 26" and very similar to your s795 but it has a 1" cam similar to your 15-194. I need 4 of these balances.

Hi - I need help with ordering replacement balances for 2 different size windows that seem to be manufactured by a company called MW ( I will send pic of logo)- they were provided in a modular home I built in 2006. in both windows one side of the window balances is broken inside- I have pics with t ... (cont.)

Dear SWISCO, Is there a SWISCO store in Houston please? I need to buy some tilt latch, balance and shoes after checking if they match with my windows.Thank you very much for your reply. I see the labels on the parts as below. Tilt latch: L. My measurement is 2.5/8" x 12/16" x 3/8" T-lock, balan ... (cont.)

The part that broke for me is the twist lock shoe. I would like to buy 2 shoes but would consider buying sash balances if the sash balance is the only way to get the twist lock shoes. This is from a Pella impervia window. I tried to show the number stamped on the sash balance.