Viewing all customer Discussions for:

15-194 1" T-Lock Balance Shoe, Closed Cam

These are the springs which work well. I am trying to identify what they lock into on the bottom pane. The window balance?Looks like a plastic piece the spring latches onto..couldn't get close to get a picture. I could remove the window if neededPaul

Need 26C Series Channel Balance with Balance Clip Attachment and 15-194 Balance Shoe. Have 14 year old Jeld Wen vinyl windows with round hole. Need 4 of these assemblies and would you be able to provide these. Thank you

Plain channel balancer, with 28c on it. Shoe looks like a series 795, but is only 1" wide

We need a part for our Philips window. I am not familiar with the terms stirrup or bobbin being applied to window parts so I need some help. The number 30B is on the side of the metal piece that the cord runs through in the first photo. The metal piece is 30" long and 1/2" by 1/2". There are als ... (cont.)

I'm looking for pivot shoes for the bottom of a double hung tilt in window made by ThermaStar by Pella. The serial number stamped on the inside of the window pane is G0313393146 NFRC PEL-N-108. Thank you.Jim

I received my order last week and the 15-194 will fit in the space but will not snap in because of the concave of the metal channel. see attachments

Hi,Our windows were new in 2008 (manufacturer unknown) and many of the channel shoes have broken at the end that hooks into the channel track. It looked like your 15-194 channel shoe would work but it just doesn't quite fit. The channel balances all seem in good condition (no rust, cords all seem ... (cont.)

Trying to figure out how to re-attach the channel spring/string assembly to the shoe at the bottom. thanks!

I am looking for window balances for 4 windows. I am attaching 5 photos. Patent number on part 5.737.877 Please let me know what the price and shipping details would be to Simpsonville, SC

Hello,I need help finding this window balance. If you need additional pictures or information, please let me know.Thank you in advance.

Hello !! I have been looking at your videos for a substitute, but due to the shoe size limitations on newer balance models, I decided to write you for your opinion. I currently have three windows in my apartment, but this building has over 60 apartments with the same problem. Each apartment has 8 wi ... (cont.)

Replacement parts.

I'm in need of balancers for single hung Pella PVC windows. The sash size is 49"X 27.75". The balancer series is a 28G. 28" LengthPlease contact me with availability and price on these balancers. I will need several sets. Thank youTony

26B CJ BSI AP

I need a quote for the following, you recently made some of these up for me. 10- 28C Stamp Series 795 Balance with the 15-194 shoe and 15-198 hook attached.

Recently I purchased 795S balances and unfortunately, they don't fit my windows. I have attached a picture of the balance that I removed from one of my windows so that you can guide me ordering the correct part(s). My contact information is below:John Thank you for your assistance. ... (cont.)

The attached shows both the new one 26 inch balancer assembly, and existing. The issue I am having is that the bottom cam part is too wide as you can see in the picture The tape measure picture shows the different. Only marking on the old one is 26B. Please let me know if you ha

The stamp on my window balance is 26-5. Can I order S795-26 for replacing? Which option should be (A.B.C.D.E.F.G)? S795-26 already included a 15-194 T-lock balance shoe, close cam and balance clip attachment in when ordered S795-26, right? Thank you.

I am in need of pella window balances they are labeled 34b on back. They are 34 inches long with a string tackle set up. They have claw clip on one and a tilt mechanism on other end.

I have a project to renovate 117 townhouse units and I need to fix any window with balances that do not work. The balance has marks : BSI, RA and 28C. Your help would be greatly appreciated.