Viewing all customer Discussions for:

15-194 1" T-Lock Balance Shoe, Closed Cam

Hi, I ordered the S795-31 channel balance. My only issue is that the balance shoe is too wide for the channel. Is there a similar balance available with a shoe that's narrower? Thanks Bobby

Hello i. Want to buy 10 balances 34 c with the hook , they get installed on top and with the white wite with that type of shoes the should should be 34 c. 34 inch length with the hook that get stuck on top end of the balance trackThe shoes should be around the same thickness of the balance or slight ... (cont.)

I have a circular hole. What do I use to for that? The 26-200 Screw Plug is the wrong shape.

In the images, I included the failed pivot lock shoe part number 6.679.000,4.610.108,D467.490 I read that those parts are no longer made. I measured the failed part at 1" My channel balance has the markings 28C and is flat channeled. The balance channel also requires the "hook" as pictured. I did ... (cont.)

There doesn't seem to be any identifying labels on the frame or glass. The plastic on the ends of two windows is broken. There is a third window that is ok that I can use as a model to restring the cord. There is a patent number on the plastic piece: 65737877Thank youJohn

We have a window that doesn't stay open. We were able to get this channel balance out. It is rusted and broken. The only markings we see are 28D BSI R6/RG? We are looking to replace both sides of the window. Could you please direct us to which part/parts to order.Thank you, Jeff

I purchased several Pella double hung folding sash windows 10 years ago. Needing a balance the defective one I have has this number stamped on it. ( 28B BSIAN ) Do you have these very much appreciate it if you do. Thanks In Advance

Only description I see is 28C. Need to order a decent amount of them.

To whom it may concern, I have some old windows and I am in need to replace some of them. The Rod window balance are 29" long. See photos of my actual balance. Do you sell a replacement direct fit? We have a beach condo and there are some other neighbors who are interested in replacing them. ... (cont.)

Is this part available or even a one piece part I can put in window so it will slide up and down these are tilt windows Thank you

Thank you

The widows that were install when I purchased our home were Twinseal by MW Vinyl.I'm looking to replace T-Lock Balance shoe on both sides of the sash. Channel balance markings are 26C BS1N their is a hook on top end that connects to the window frame. The overall length is 28 inches. Window sash wt. ... (cont.)

All the plastic B&T accessories are breaking. Windows are in great shape otherwise.

It measures 28" long , by 1/2 " wide has along spring is 14" long and two pulleys. Do not know the window brand.

I have a window labeled 52-2905-WHT 15329614 7 2. The long spring-loaded metal piece including the plastic piece that was attached needs to be replaced on both sides. I have someone that will install for me if I can get the parts.

I need to replace my 38E balancers. They are the 1" 15-194 wide no thru cams with a hook 15-198 on top. I tried to load pictures, but it didn't work. Please quote.

These are the springs which work well. I am trying to identify what they lock into on the bottom pane. The window balance?Looks like a plastic piece the spring latches onto..couldn't get close to get a picture. I could remove the window if neededPaul

Need 26C Series Channel Balance with Balance Clip Attachment and 15-194 Balance Shoe. Have 14 year old Jeld Wen vinyl windows with round hole. Need 4 of these assemblies and would you be able to provide these. Thank you

Plain channel balancer, with 28c on it. Shoe looks like a series 795, but is only 1" wide

We need a part for our Philips window. I am not familiar with the terms stirrup or bobbin being applied to window parts so I need some help. The number 30B is on the side of the metal piece that the cord runs through in the first photo. The metal piece is 30" long and 1/2" by 1/2". There are als ... (cont.)