Viewing all customer Discussions for:

15-198 Balance Clip Attachment

Need 4 Chanel balance fo lit windo

Good morning, I have a window, 18.25 tall and 33 wide with a 16" long metal balance that has a 3/4 inch long twist hinge connector, making the balance be 16.75 long. These are the pics I could take without removing one of them. And also the weather stripping is ripped and needs replacing. Can y ... (cont.)

39" length, metal channel Stamped - 39C GemPly Bryan Window

I am looking for support on a few questions regarding your 795 Channel balance Support. Based upon the pictures I have taken below and the stampings on my existing channel balance, I am in need of the S795-33C with the standard 15-195 T-Lock Balance Shoe with a Closed Cam (confirming this is the sta ... (cont.)

Need a quote to convert your regular Series 795 to a hook mount as a custom.

I need a quote for the following, you recently made some of these up for me. 10- 28C Stamp Series 795 Balance with the 15-194 shoe and 15-198 hook attached.

The broken piece was already taken out of window. I purchased what I thought was a replacement but it doesn't fit.The curved part at end that clicks into metal crossbar is too thick and not as curved.

There is no other markings except 27E on the top part of the part. This is window balancing spring.

I am the warehouse manager and I need 60 balances see pics

Please see attached photos and let me know if you have these. I need 15pcs

Recently I purchased 795S balances and unfortunately, they don't fit my windows. I have attached a picture of the balance that I removed from one of my windows so that you can guide me ordering the correct part(s). My contact information is below:John Thank you for your assistance. ... (cont.)

I am in need of pella window balances they are labeled 34b on back. They are 34 inches long with a string tackle set up. They have claw clip on one and a tilt mechanism on other end.

Paul, et al: I need to special order a S795-27C Balance with a 15-198 Balance Clip Attachment as well. Can you please send me the custom product code so I can get this part shipped immediately? I have other items that I will put in my cart as well to have shipped together.

I need a count of 4 of balances that are shown in the pictures.

here is a picture of the original channel balance. You will have to enlarge it. The top channel balances are labeled 28-c. The bottoms are 26c. The hook has to fit into a hole in the trim behind The channel balance. inside a small hole in the trim.

Current stamp shoes as 28C. Does pivot shoe come with order. Please advise. Thanks Rajeev

Looking to identify the replacement for the channel balance in the photos. 32c is stamped on there. The spring is 17in. The clip on end of string is pictured above, and different than what you have pictured on your website for the part I think I need.32" Series 795 Channel Balance (32c)Product C ... (cont.)

I believe I have 1/2" x 1/2" Inverted Block and Tackle Balances to replace but I am not sure if that is correct. They are 33 1/2" end to end (includes clip and post attachment and are stamped "32B BSI pt" I will attach photos and need to replace both the left and right sides of the single tilt out ... (cont.)

I seen you had another post with the same balance, said it needed to be made, I need 2 of these made please ASAP. Kenny

Please provide a custom quote for this configuration. Top is a hook-type and the length is 34D. Thanks, Rashid