Viewing all customer Discussions for:

15-198 Balance Clip Attachment

I am the warehouse manager and I need 60 balances see pics

Please see attached photos and let me know if you have these. I need 15pcs

Recently I purchased 795S balances and unfortunately, they don't fit my windows. I have attached a picture of the balance that I removed from one of my windows so that you can guide me ordering the correct part(s). My contact information is below:John Thank you for your assistance. ... (cont.)

I am in need of pella window balances they are labeled 34b on back. They are 34 inches long with a string tackle set up. They have claw clip on one and a tilt mechanism on other end.

Paul, et al: I need to special order a S795-27C Balance with a 15-198 Balance Clip Attachment as well. Can you please send me the custom product code so I can get this part shipped immediately? I have other items that I will put in my cart as well to have shipped together.

I need a count of 4 of balances that are shown in the pictures.

here is a picture of the original channel balance. You will have to enlarge it. The top channel balances are labeled 28-c. The bottoms are 26c. The hook has to fit into a hole in the trim behind The channel balance. inside a small hole in the trim.

Current stamp shoes as 28C. Does pivot shoe come with order. Please advise. Thanks Rajeev

Looking to identify the replacement for the channel balance in the photos. 32c is stamped on there. The spring is 17in. The clip on end of string is pictured above, and different than what you have pictured on your website for the part I think I need.32" Series 795 Channel Balance (32c)Product C ... (cont.)

I believe I have 1/2" x 1/2" Inverted Block and Tackle Balances to replace but I am not sure if that is correct. They are 33 1/2" end to end (includes clip and post attachment and are stamped "32B BSI pt" I will attach photos and need to replace both the left and right sides of the single tilt out ... (cont.)

I seen you had another post with the same balance, said it needed to be made, I need 2 of these made please ASAP. Kenny

Please provide a custom quote for this configuration. Top is a hook-type and the length is 34D. Thanks, Rashid

Need a pair.

The length is 27" The width is 1/2"

I am looking to order (4) S795-28 with a 28D stamp. I'll need the 15-198 Hook as well as the 15-194 T-Lock pivot shoe. Please let me know if you'll need any other information from me.

33" balance with metal hook that attaches at top of window. About 1/2" deep & 1/2" wide 33" long. Window would not open then when worked on & forced broke. Thank you for any help to identify the parts & I need 2.

We are looking to replace 2 channel balances as well as the balance shoes and from everything we could tell with measurements and part numbers, the shoe matches the 1-1/4" 795 closed cam and the channel balance seems to match S795-33 and has 33B etched on it. However our existing channel balance ha ... (cont.)

Hello, I'm looking for this window balance.

Balance is 16 inches long by 9/16 by 9/16 string and hook come out at end of balance not able to take picture of it installed window is in a camp out of state in MaineI will be needing 2 of them