Viewing all customer Discussions for:

15-198 Balance Clip Attachment

Says 28c on it

I would like to order (2) of your balances S795-33 with option 3D but I need your top clip attachment #15-198 installed on the top of each balance. Could you tell me how much these will cost with standard shipping to Savannah, GA 31404 including the installation of the top clips? How would I o ... (cont.)

I bought 2 balance shoes to repair my window but the ones that I received (15-195) are a little fatter than the ones I need I think. I have tried and tried to make these work but i cannot get them into the window. The ones that came with my window are probably 3/8in where the ones i got sent are ... (cont.)

This is a 2"long, 3/4" wide part possibly called a terminal clip, tension cord hook or channel balance clip. Via a hole at the top, it attaches to the end of the tension cord that runs through the channel balance. The metal clip then slips into a groove in the sash allowing removal of the window fr ... (cont.)

I am looking for the spring loaded lift (left side), and the metal piece that fits into that from the window. See pictures. The only markings on the spring loaded lift are: "30C", the a sideways "BSI",perpendicular to "PV". Hopefully that helps? One problem, your website shows a flat piece at th ... (cont.)

Attached are photos of the balance we discussed over the phone. The balance is 27" long (27C is stamped on the unit) and the part in you catalog that matches accept for the

This is a 28" Channel Balance (plain channel). As best as I can tell it's the Series 795, but the shoe looks different on mine than your illustration, so I wanted to check. The shoe has split and the metal clip it housed fell out. Since it is riveted into the channel, we are assuming that we w ... (cont.)

It looks very much like the 795 balancer with a 36" x 1/2 x 9/16 channel except the plastic pivot shoe on mine is only 1" wide and yours show a width of 1 1/4. I could probably cut that down to fit but wondered if there is another pivot shoe that is 1"wide?

To Whom it May Concern, Attach are a few photo's of a type of balance that I'm looking to for. The sizes are 27"x 1/2" x 1/2". Do you carry this style?

I need to order (2) Series 795 channel balances with 15-194 1" T-lock balance shoes and 15-198 clips but don't see this part #. This is for a stamp option 34C

I need a balancer for a vinyl window, manf. unknown. Length is 36 3/4, 1/2 deep, 1/2 wide. Markings, 36C BSI re Bruce

Hello, I believe I have Kinco windows which are no longer being made. I see that you can supply replacement parts. I cannot find any numbers on the balances or the boots but am including photos to see if you might have something that will work. I had ordered balances from a local company but they ... (cont.)

I have what looks like a Series 795 Channel Balance. The only difference is that the one I have has a flat hook at the top. Is that something you provide? Mark

Do you have this replacement part?

How can a I order a 795 series balance with a 15-194 shoe with a 15-198 balance clip? Looking for qty of 2. Thank You

I need to replace several balances in my MW Twinseal single hung windows that were installed in 2000. I know I need the crossbow type balances, but am unsure how to remove the cord from the frame. Your video shows simply unscrewing the top but I do not have a screw. I have a plastic elongat ... (cont.)

One of our windows will no longer remain up. It appears that the internal guide spring has malfunctioned. Is there a way for me to replace this item? Do I need to contact a local dealer? Thank you, Paul & Ginny

The channel balance is marked with 28C and B51 The pivot end is marked with 4610106 The part matches your catalog item S795-28, option 28B except it has a hook on the end opposite the pivot. I need four complete channel balance assemblies like the one pictured.

I am looking for a balance and pivot for one of my windows. The Balance is 17 inches long. I believe it is a ply gem window but I'm not sure.

The window channels are 32