Viewing all customer Discussions for:

39-362 Andersen Casement Operator Adapter Plate

Windows installed probably 20 - 30 years ago. 2 windows per section x 3 sections with about 8" separation between each 2 window section along wall of upstairs room. Of the 6 cranks, only about 3 will push window out and up. The others either grind and sound stripped or if window is out must be pu ... (cont.)

My order number was 1759286,these were parts of Andersen - straight arm operator and Tandem stash Lock. These parts did not fit and I returned it back. I have uploaded the pictures of the parts that is currently on my Window and looking for the correct replacement parts. Please let me know the corr ... (cont.)

Hi, These are 2 cranks from 1997 casement windows, one left, one right, both appear to be stripped. Can you tell me the correct replacements? I have crank handle, I also need the covers. Rhank you, Richard

Hi, I need to replace a control arm for an Andersen Awning Window. The Operator bottom has the marking F-9400-8A. There is also a B stamped on it. The straight arm has the marking 1521105. I did a search on your web site for part number 1521105 and product code 39-099 came up. It appears to b ... (cont.)

C-9400-1

The window crank gear is stripped and the locking mechanism won't catch on the keeper. Does this crank assembly need the adapter mentioned in the description? The glass area of this window is 31.5 x 43".

Hi- I need new handles and encasements for my Anderson windows and I am not sure which product will fit. I appreciate the help. Thank you. Lou

Window glass is stamped with Anderson. No markings on operator parts Arm seems to be 8 3/8 or so Looks different from typical Anderson straight arm operator replacements from what I can tell. The cover for the crank handle is only 3 3/4" to 4" wide. House was built in 1967 not sure if this was a rep ... (cont.)

What is the new part number for this type of window crank? Does anybody know? Or where to get them?

I need to replace 2 of these cranks - can you provide compatable replacement parts and do I also need new handle and covers? I think Handles - yes but covers I am not sure if the current will fit new or not. Thank you, Jack

Looking for a replacement for window crank operator, Anderson window, installed 1999. On part has nubmer F 9400 8a

Number on hardware cw35-cw6 and below that cxw5-cxw6 23 " str can you help replace hardware and hinges thanks ?

Stamps: (F9970A-8) & (A)

The number on the top is C-9400A-1. On the bottom the number is F-9400-8A. There is a single bump on the bottom so I'm not sure if an adapter is needed or not. Thanks in advance for your helpGene

Need part for opposite window ??right. Are there 2 seperate arms to be purchased? I'm seeing that I need operator,handle, cover. Any help in finding the right parts. Thank you.

The window this is from is in another town so I do not have installed pics. F-9400-8A stamped on underside of main assembly There is a C on the extension arm and 1361484

The part number says c-9400-1 arm length is just over 8 inches. The window type is Anderson. Any direction you may have would be great. The number on the arm is 1521101 Brass plate underneath reads f-9400-8 with the letter B underneath

My Bay window crank needs replaced; it is Anderson part C-9400-1. I called and you requested pictures to get the correct parts

We are looking for an Andersen EZ Split Arm Operator / mechanism for an Andersen window. The # on the front is C-9400-1 and the number on the back is F-9400-8. The distance between the (2) furthest holes is 4.5". I saw a recent post asking the identical question, but looking at the 39-264 operator a ... (cont.)

Hi there, I am looking for a match part for my window closing mechanism assembly. I would like to get the whole thing and replace it since the small gear inside is completely worn out. The part number on it it is faded but my best guess is (part number : 9970A-3A). Please advise me that wich one of ... (cont.)