Viewing all customer Discussions for:

39-362 Andersen Casement Operator Adapter Plate

These numbers are on the arm 1361460 07/16/02/1 Also measurements of the arms are 3 1/2 and 4 1/4 Thanks!

hi - this window was damaged by a bear getting in. looks like i'll need that bent arm assembly, as well as the crank and cover for the latching mechanism. also some of the wood trim parts and the screen. thanks for your help!

I have one casement window that it appears a nylon bushing has broken so it will crank out but not back in. Looking for a replacement. the part number appears to be C-9400-1

I am attaching two pictures below. Hoping for some help identifying the correct parts. Thank you in advance!

I need to replace this operator

i believe these are the original windows and the house was built in the early 80s near sacramento california. the interiors are wood and the exterior seems to be clad with vinyl. i will be so appreciative if you can help me find the handle and other parts! thanks.

Pics of the faulty part in question. On the top, there is a Part Number of F-9400-A by the center circle. On the bottom, there is a marking of 1361484 and 052402 on the second swing arm. I presume the 052402 is the manufacturer or inspection date since we purchased the Anderson encasement windows in ... (cont.)

The photo shows my existing operator has three screws aligned with the geared pivot point plus two more screws on a smaller centerline toward the external side of the window. All replacement operators I see have a different mounting screw arrangement with two unaligned mounting screws with smaller ... (cont.)

Please let me know if you have a replacement parts (Operator, Cover and Handle)

I am trying to locate an ANDERSON WINDOWS window crank On the back of the operator, the number F-9970A-8 is stamped On the back of the arm, the number 9958-1 is stamped The arm measures 2 7/8" on center Any ideas what will work?

Anderson window Pat no 5623784

C-9400-1A

No Names on window or crank parts. Number on Crank in photo; 9958-1 9 inch arm. Closes in to the left from window operator view. White Crank.

stamped on the top of the operator are the following 0-9400A-1 Right it is a double arm unit.

Hello i have a window opening with two casement window in it. One of the window not working properly,feels like gears are striped, I took off both window sashes and one looks like it was replaced.it has the spacer on it.i bought the house about 1 yr ago the house was built in 1997 ... (cont.)

I have a stripped part from my bay window that allows me to open the window by cranking it. Looking where can I find a replacement part.

Please help me to ID this broken gear set to open my casement windows. It has a number on it, C9400-1B and Patent 5,623,784. Thank you

Hello Tech Support,Looking for this Anderson casement window operator. The arm length is ~ 13 1/4 inches from the crank pivot point to the pivot point on the slide shuttle on the window frame.Also looking for replacement patio door roller assembly shown too.Thanks Paul

Can you guys please tell me what Anderson operator I will need gears are stripped on 12 inch Anderson casement window Thanks

Here are the #'s on the linkage: CR CN/ALL C2- G45 CW9 (9?) - CW3 1361409 On the window: CIG-3 1-97.6 I need to know what operator to order for these windows. I have 6 of them both right and left handed opening. Thanks, Sam