Viewing all customer Discussions for:

15-199 Pivot Shoe, 17/32" Thick

Just wondering if I am able to get replacement parts for my Simonton windows? I believe it's the balance assembly? Any help would be greatly appreciated!

I can't find this part

Hello. I opened a window earlier this week and the balance assembly on the right side of the window essentially fell apart so I'm trying to figure out/confirm I am ordering appropriate parts. I have a Simonton window. Included are the labels off window and pictures of parts. I have found some very h ... (cont.)

The window weighs approximately 21 LBS. The size of the window glass is 27.5 tall by 30.25 Wide. The sash that goes all the way around the window is about 1.5" (the white part that hold window) There are 3 springs hooked together that individually say #4 035" P

Can you please help me identify the window coil springs that I need. I don't see any numbers except the ones on the coil .

I can't get my window to raise or lower! I put the new shoes, coil springs, and supports in place that you sent me. I believe the pivot bar is the culprit in this! The original T pivot bars were a bit longer and the T end seemed to be a little large then the one shown above. I can move the shoe with ... (cont.)

Need help finding this part. Thought it was a plygem part but they are saying it is not and referred me to you.

I need a coil balance for my Simonton double hung window. I don't see the part number on the piece just a pat no. It did appear to have two coils when I was disassembling the coil balance from the window frame. Please let me know the part number I need to order. Thank you.

Do you have a match for this pivot bar? The length is 2 1/2 inch or 3". I need to verify that for you.

Hi I have a 15 year old Simonton windows broken pcs I need recommended parts thank you

Any help with these would be greatly appreciated.

Hello, I am getting very frustrated due to Simonton. I have a customer who needs Single Hung balancers swapped out in one window. Never did it before for this window, but feel I could if I have instructions. I do not have cam measurements, but new cams are needed, 2 pivot pins and balances for l ... (cont.)

Hi,I'm looking for the part that is pictured below lastlyInside the sash providing the lifting action of the bottom portion of a double hung window.Both pieces of another window were brokenThe make of the window says radiance on the two locks to latch the window.The plate screwed into the sash holds ... (cont.)

Hello, This balance is for a double hung window and also has a 15 stamped on the housing. Can you help me identify this part? Thanks!

We have 2 vinyl windows won't stay open. It seems the balance kit was broken.Attached are pictures for a good window, and a bad one that won't stay open. The size of the two windows is: 1. 21 1/2 * 34 2. 33 1/2 * 33 1/2Please let me know the parts I need for both windows. Paul

Pivot shoe = 5704,165 3 Coil springs = 44.0 35" T52322 (questionable on this-hard to read) Coil support is in pieces - deteriorated by the sun Don't know about the pivot bar The plastic has failed on the coil spring cover, making the windows difficult to open and close, however the coils look fairl ... (cont.)

I need some advice on part number to order. need a new coil balance. thanks

Hello ~ I'm looking to get the Simonton Pro Finish Contractor series balance assembly. Do you sell them?

Hello! I am looking for replacement parts for my window coil balance. Attached are photos of the one I removed, these are on both sides of the window. I plan to replace multiple window coil balances, many of the coils have fallen to the bottom and broken due to to the screw coming loose. Please ... (cont.)

Hi, I am sending you these photos of my balance coil cover that I need for my 1/2 wide Balance spring coils. I ordered your 15-150D 1/2 " Coil Double Support, but is this the closest one you got to my photos?