Viewing all customer Discussions for:

15-199 Pivot Shoe, 17/32" Thick

Looking for replacement part H-R35*-1342X1600 (73×63) (MULL) Code: SIM-1 SERIES 43-17 DH TWIN (T-MULL)

Windows are MI Series #380 DH Coil Spring has no part number but printed on it is: 10# 35" 037 Z Coil is 1/2" thick and 35" long I believe the follow are the part numbers. Please Confirm: Coil Spring Part number is : S160-10 Pivot Shoe Part Number is: 15-199 Coil Single Support Part Number is: 15- ... (cont.)

What I'm missing is Four items: 1) upper nylon block (this holds item 2). this block screwed into exterior of window jamb. 2) metal spring that assist raising window. 3)lower nylon block that slides up and down. It also will hold item 4 when you set it in. 4) Metal (seems like weak almost lead) "T ... (cont.)

hi would like to find these replacements for wood double hung windows piurchased from Elite Fenestration manufacturer in Quebec Canada please

Hello, there are no numbers or description on these parts. I think what would fit is the

Based on other posts and reply's I think I need 15-204 dual cover a 15-199 pivot shoe and a series 165 spring my problem is the coil weight not sure what to order the window was 19.8 Does this sound correct Thanks

The existing housing has become brittle has started to fall part (It has on at least 2 windows). This is my first repair. I replaced the coil springs and housing. The issue is the new housing is a box. If I move the window up or down pass the new housing, I will break off the tabs on the tilt win ... (cont.)

I want to order this part. Left and right.

A rep who now are the contact for our Simonton Luminess 400 series windows provided the following. Our current local window contractor/company stated we needed a new "balance shoe" for a double-hung window.'The part number or balance sizes you need are 3.5 Omega and 5.5 Omega balances. They are for ... (cont.)

I cannot identify the Shoe in these pictures. It is 1/2" deep x 1 1/4 wide X 1 1/4 tall. You have one that is close but only 1" tall.

I am looking for a window balancer, top latch and pivot shoe for a Simonton 40-06 single hung window.

I believe you have one product that looks like this but I'm not sure about the whole alignment. The gentleman that put these in said he made these so I hope finding this part isn't too difficult

Hi, I need replacement coils, shoe, and bar for my Simonton window. I attached the sticker on the window. There are two coils inside the housing and the coils are stamped top row 35 3.5 35 and bottom 232208 as best as I can make out. There also seemed to be a third coil on top of the shoe but below ... (cont.)

These springs are 1/2" wide and I also need new covers. What parts do I need and is their an install video or info?

I have a Simonton 70073 DH window that has a broken balance assembly. I would like to replace both. I beleve they are the coil type. I have added pictures.ThanksChris

It is a Simoton Windows that is about 17 years old. Can you tell me what parts I should order? Thank you

I think the pivot bar is 26241 not sure which shoe cam it is. It's for appleby double hung tilt in windows from 2005.

Hello What Type of Balance is this? it measures approximately 1-1/4" Wide X 4-1/2" Long. I couldn't measure the depth but I would assume maybe 1/4" deep. I also include a picture of the shoe

Thise has three spring steel coils to hold window in open pisitions

Sistem up and down is broken