Viewing all customer Discussions for:

15-199 Pivot Shoe, 17/32" Thick

I ordered 26 lb series 140 quick tilt , triple spring balance system and I think it is too deep for my windows. I am attaching photos of my spring system against a measurement ruler. The channel break has part # 5.704.165 stamped on it. The springs have0.35" inked on it and one of the springs has ... (cont.)

As you can see I need a multitude of parts. 6 tilt pins. 4 left tilt lock/releases. 4 right tilt lock/releases. 2 single spring balance/shoe assemblies (blue). 4 double spring assemblies (blue). DBA StoneRidge Construction. I've installed replacement windows, mostly Alside, for over 30 years. 100's ... (cont.)

The Simonton Profinish in window in our Tallahassee FL home mainly face east and west, so they get a lot of sun. But, all the other windows have similar issues. Several of seats and lift springs (not sure if that is what the parts are really called) and a couple pins are broken or in rough shape. ... (cont.)

I have # 15-191 pivot will it substitute for the picture I sent you of that shoe?

Hello, I have several windows in my house where the windows done open and close easily they are Simonton windows.

Hi, I'm looking for help with identifying these coil balancers for my windows and the accompanying pivot so that I could replace them. thanks!

This broken spring on the window I am trying repair does not have a calibration number. How do I select the correct one?

I have a tilt single-hung window with V-grooved IG units. The Sash weighs 29 1/2 pounds. It has an unusual triple-balance assembly with three individual coil supports connecting to the the T-bar tilt shoe. Only the bottom coil spring has a number 9 on it and the sash weighs 29 1/2 pounds. If I order ... (cont.)

hi The dual coil springs have one #4.5 35" and one #5.5 35" coil springs (232208 is printed on #4.5 coil). The #5.5 35" coil spring was broken into halves. the sash weights about 17.6 lbs. which part should I order to replace the broken #5.5 coil spring?

The one thing I DON'T have is a photo of the darned Simonton order number on the top of the window. But maybe you can tell from the description in the order (Simonton Impressions 7300) what the right size is...? It'd be nice if they were all the same size, or something. Thanks for your help! ... (cont.)

Window balancer coils. The covers are breaking apart.

Need counter balance springs

Trying to figure out what it the correct part to order to fix my window

where can I find replacements or subsitutions for these.1 1/4 inch wide,1/2 inch thick,1 1/2 inch high.no idea the manufacturer. or model number

Need pivot bars : one bar has the number 5 on it the other has number 7 on it. Anchors: The number on the anchor spring is 7.5 31p (523208) The label is the sticker attached to the window.

Hi I wanted to purchase three sets of balance springs for these windows that are 20 years old. Can you please help me find the part number to order thank you Brian

I'm looking for the coil balance for Simonton windows. The number for the window is 04728714060001. I hope this helps as there is no number on the part. Thanks

Need new springs for vinyl window Thanks Paul

Hi there, A few of my Simonton windows no longer stay up. It looks like the balance assembly may be the issue. Can you tell me what part(s) I need in order to fix the issue? Thanks so much! Taylor

I'm having trouble finding this replacement or something similar.