Viewing all customer Discussions for:

15-199 Pivot Shoe, 17/32" Thick

I just discovered that of the two sizes of windows we have, the other size has a triple coil, with a different cover. Pictures attached. Thank you. One more. I had a triple coil spring that was blown and got a pic of the imprint. Will, the spring for the triple coil be the same as the spri ... (cont.)

Good afternoon! I need to replace the coil balance on a window. There is one on each side. I took a picture of the coil so you could help me find the correct part. Once I have identified the correct part, I will want to order 3 sets of them. Thank you!

Hello, I have one window in which the coil has snapped in half, I have been able to remove the parts but need assitance finding the correct Coils to purchase. Would you be able to assist me in ordering the correct Coils? I have attached photos of the parts/numbers. Please let me know if there is a ... (cont.)

Need help with this window coil balance. Some of my windows will need to replace those parts. I will need the entire set.

Coil is sprung on right side of window as viewed from inside house. Would like to replace both sides. Can you tell me correct parts to order?

Could you please help me find the numbers for the replacement parts that will work with simonton Windows. The springs are 5 lb each.

Not sure what these are all called but need all in the pics for both sides. The spring has #6.5. 35" stamped on it. Thanks.....

Ok don’t know the manufacturer but it’s a double coil with markings #5.0 35” P5232208 see picture.

These are photos for Simonton windows new in 2005. The coils have have 3.0 on one and 4.0 on the other, so I'm assuming they are 7lb, 2 coil units. The dimensions on your series 140 look correct. It looks like you could use a single coil replacement of the correct lb instead of a 2 coil. I have 2 wi ... (cont.)

A tall American Craftsman vinyl double hung window installed 2011. Believe need 2 pivot shoes and the stops with the coil springs that attach to them. Also looks like the bottom right pin which goes into the pivot shoe is broken, is that replaceable?

Could I get help with a replacement part? The window was made in October 2006

The marking near the tongue of the spring coil is #9.035" can you identify the parts I need to fix the bottom sash? thanks anthony

Hello. I have a window sash that needs to be repaired. The brand and model is Simonton Impressions 7300. The coil is 1/2 wide and the sash weighs 19lbs. Could you help me identify the parts needed to replace the coil, shoe, and pivot? Thank you

Could you please help me to identify what part should I need. Simonton window single hung, both sides tilts latch and pivot bar (also missing the screws) and pivot shoe and spring

Please e-mail to me part numbers of replacements of pictured window balancers. Thank you

3/8" wide with (2) #4 35" and( 1) #3 35" each side. Need enough for 3 windows. All parts. Thanks

I have 30 windows that are in need of various parts. Pivpt Bar, Pivot Shoe, Coil Bal. Cam lock, Tilt Latch they are all the same style window. I have included a photo of the ID tag I would like to place a parts order Thank You Jud

Hi, our windows weren't staying up and hard to slide. After looking, I noticed some broken parts. Screw have come out on both sides and move with window. Picture shows broken parts. Please advise what replacement part or parts are needed. Did notice the part on bottom of window was bent, not allowin ... (cont.)

We have plygem premium 2000 windows circa 2020. One of the balances snapped and looking for replacement. Want to be sure I get the right one.

window coil spring broken. waiting for jam spreaders to remove old parts