Viewing all customer Discussions for:

26-378 3" Pivot Bar

I am pretty sure this is a 3/8 inch egress coil triple support it's an inch and a quarter wide by 4 1/2 inches long and looks similar to your product code 15?205. I also need a little metal bar that goes down in the bottom of the window as the Pivot arm

will be helpful if you can find this pivot bar

3 inches long 2 hole pivot bar

We are in need of balances, shoes, & pivot bars for 7050 MI windows. We previously submitted a request but lacked pictures on the balance piece needed. Please contact us if we can get these parts through your company.

This strange shape pivot bar is not available from the manufacture. The shape of the end of the bar that goes in the shoe (shown above) must have the correct width so it turns in the shoe and be flat so it drops into the shoe. This is for a vinyl window and you see in photo the wood screws that se ... (cont.)

There is no manufacturers info that I can find interesting he window frame or windows. I just moved in and discovered that the pivot bars are broken. They are all vinyl, inside and out. I don't see a match on the site, but if you have ideas of what would work, I would like to be able to lift and low ... (cont.)

Hi, i have acan 550 series windows and am looking for these pivot bars. they are 3 inches long

Hello, I am looking for two pivot that broke in half. They fit in a Simonton Profinish Brickmould 600 Vinyl Double Hung Window. Any help would be greatly appreciated. Thank you

These are about 6 years old the windows are from like a wallside or hansons.

Please contact me so I can order the right parts.

Top window fell in place braking the pivot bar. Held in by one screw. Looks about 3" long with "shoulder tabs" to stop it from going in totally. Which one of your stocked pivot bars would work?

This looks similar to part 26-272 but not quite the right spacing on the far hole. Do you have a part that might replace this? Thank you! Dave

Pivot is 3" long, 1/4" wide, 3/32" in height, head is 1/2" by 1/2". Attached are all the markings I could find on the window. There are no markings on the pivot.Sorry it's almost 3/16" in height.

I also need the cover for the coils. It says #5 with the pattern number on it, the one in the picture. The second coil is a copper color and they attach to the pivot shoe. I sadly need the coils, pivot shoe, and the picot

As per my measurement, it's a 3" pivot

My fireman window when pulled out to clean does not slide evenly. It appears the plastic slide is cracked and no longer connected to the actual window. It just stays in the track and does not move. Both of my big windows are currently having the same issue. Please help

my son broke both tilt lock pieces on one window. everything still works but i would like to replace them. included label of window. he also broke whatever keeps the window up when you open it, on another window, see pics image1,2,3. much obliged if you could help ID the parts needed. kids are ha ... (cont.)

I'm in need of a pivot bar that is 2 3/4 long. With the screw holes from the bottom being 5/16 and 1 5/16. Which one would you recommend?

I am looking for replacement pivot bars for vinyl double-hung capitol windows (installed in new construction approx 2002). I show a picture of the pivot bar and the receiver in the window frame. From your site and my inspection of my windows, it appears that either the 26-272 or the 26-378 pivot b ... (cont.)

Good afternoon, trying to find this part or its replacement(s). They are Traco windows, however I am not sure of the parts as I did not see any part numbers? Was told it was a window balancer. This makes sense as it appears to be a coil spring used to keep the window stationary when raised (lower) ... (cont.)