Viewing all customer Discussions for:

26-378 3" Pivot Bar

don't know what make window this is but the bottom sash can tilt and the top sash goes only up and down very frustrated

We bought these in 2009. On 3 windows the plastic parts on the side tracks are broken. The part number is 801020. On one window, the horizontal channel on the top of the lower window is broken, but we may be able to repair it.

Guys, Can you match my existing pivot bar? See the attached photograph. It comes from a PGT double hung tilt window and has a marking of 111 on the side.

I am looking for two tilt pins for a double hung window from Norandex. there are no other windows of this type at the property for me to identify the pins. The vinyl sash appears to have a square-shaped opening for the pin, and there is a single screw for attachment. Your help in locating these part ... (cont.)

The only information I have is on the shoe Pat. No. 6.704.165 Window info label at top is Norandex, Inc. /N. Kansas City. 00154 monton Windows 0008110818. 8/11/00 50 There are 2 coils on each side, I would also need the shoe, covers and bars that fit in the shoe .

I need to replace a few sash coils like the one in the picture. The coils are encased two pieces of white plastic with the letters g and h with four total screws.

I am looking for a tilt pivot for a 2003 simonton double hung window.

This is a window daughters house, the window fell out and we need to replace the side springs and 1 bottom bar that attaches to the window frame. Also, if only 1 side of the glass broke, then can we get that repaired, new glass on 1 side?

I need these replacement pins for a single hung window which was made by betterbilt. Thanks! Bobby

No markings on bat

Multiple T-head pivot bars (see photos) have failed in my MI Windows Series 350. These bars are 3" long, and the holes have THREADS for machine screws. I found some T heads that were close measurements, but had no threads in the holes for mounting.

I NEED 12 OF THESE. I DON'T SEE ANY NAMES ON ANY OF THE WINDOWS TO HELP IDENTIFY THEM.

Trying to locate a pivot bar. This one is broken, and I attempted to glue it, but it isn't straight. Unsure of manufacturer. Thank you Karen

Are you familiar with these pivot bars & pivot carrier block ?

Simonton Windows

The one that broke is already missing a coil. Without taking it apart it measures 4 1/2" long and about 1 1/2" wide. I would like to replace everything necessary to do both sides on two windows bc the others are starting to crack also. I wasn't able to locate the exact one I needed on the website an ... (cont.)

We Need to get a few of these replacements it is rated at 440

My measurements are 3/8" regress and 1 1/4 wide. I believe I know what parts I need but I wanted a professional suggestion. Thanks, Troy

I am trying to replace the balance on a Simonton single hung window. Both of the balances need replaced. The entire balance needs replaced but the sliders appear to be fine. There is a metal bar on the bottom of the window that needs replaced on one side. This metal bar is what connects the wind ... (cont.)

Hi, i have a simonton double hung window, part number photo attached. I need to replace the following parts but not sure what parts in your catalog: 1. pivot bar-left and and right 2.2 tilt latch left and right 3. pivot shoe left and right. Please advise correct parts number Peter ... (cont.)