Viewing all customer Discussions for:

S385-27 27" Series 385 Channel Balance

Channel series guides for single hung milgard aluminum windows from 1996. I need 3 sets for my existing windows. This is the only marking on the back of the channel 26 3 JO CALDWEL

Length is 27in also is there sash cam you would recommend to go along with this balance? Old one is missing let me know if you need any additional photos, thank you!

Do you have replacements parts, possibly up to 14 pieces plus instructions how to perform the job.

Hello, I believe I have Milgard windows and one of the balance channels is broken. I need to replace it but am not sure where to find this part. It is stamped 26 4 DV CMC 7. Thank you for any help you can provide.

hello, I have a 27" balance spring for Milgard non tilting windows. The rail is 3/4" x 5/8" X 27". It has the numbers 26 4 EX CMC 7 printed on the rail. It is a vertical small window with a rail on each side. I would like to buy two. I don't have the weight of the window but I am hopeing the pri ... (cont.)

Please, let me know the part numbers for these items so I can order them.Thanks,Reza

I have a non-tilt window. The overall length of the channel balance is 28" and width is 1/2". Marking: 26 4 KR CALDWELL. Can you help me find a replacement? I'm assuming I should replace both in the window . . . approx 25 years old.

Looking to replace sashes due to windows loose and will not stay up or to adjusted position. It is 27" long and 1/2 " wide.

Hi, The aliminium part is 27". I can send more photo if needed.

Need part number so I can order 4 of these. Also want to make sure these are in stock?

I am trying to order two window balances The numbers on the balance is 26 6 AQ

I am looking to replace these parts cause my windows no longer stay up.

Hi, I need 3 set (2 for each set) of new 1/2" non-tilt channel balances. See attached photos, first set is labeled "26 4 JV CMC 2", 2nd set is labeled "26 5 IV CMC 8" and 3rd set is labeled "32 5 IV CMC 2". Please let me know the correct part number from Swisco. Thanks.

Looking for exact replacement for window balance. One side string broke so just looking to replace both. 2630 is stamped but that's it. See photos attached

27"L x 1/2"W x 5/8"D (Measured metal rail only) S380/S385?

The balance says: 26-4-KU-CMC-2 Can you identify what balance this code refers to?

The window track code is 26-5 JX CMC 11 I will need 2 window tracks, for the right and left

Balance is 27" long, by 1/2" wide, stamped with 26 4 BSI

Kirmin is the Manufacturer licensec number 32014. Balances stamped with 26 4 Sash weighs 20 pounds Length from end to end 28" or 27" from bottom of plastic top end to top of plastic bottom piece.

Milgard window balance