Viewing all customer Discussions for:

S385-29 29" Series 385 Channel Balance

I need to replace a 28D - 29" long and 1/2" channel. Can you help? Thank you.

I just want to make sure that I order the right part. My broken balance has the inscription D8 F0 28-1 in it. I measured it and it comes close, if not right on the 29" Series 385. Is this correct? How about the options? I'm not sure what the options are for and what I need to select as options. Than ... (cont.)

windows about 20 years old 28 9 FR CALDWELL

My sash balances are stamped with 29 6 dpBSI. Any idea which one I order for replacement? Is it the 2810?

1/2" wide, stamped 28 5 BS CALDWELL, 26 7/8" metal end to metal end length, need replacement info please

My channel balance explosively disintegrated in my window (sounded like a gunshot). Pulling out the pieces I found the length of the metal channel to be 29" (metal only). 19/32" wide (measured on the outer edges of the U), and 17/32" deep. The channel is stamped 28F. The end pieces are disintegr ... (cont.)

This window balance comes from a 28# window sash. The window per the contractor was a 'Philips' and the home was built in 2004. The metal frame is 29" long and roughly 1/2" x 1/2". What part #'s do you think will match this balance.

The balance is 1/2" wide measures 29" and it is stamped in the metal 2830 the balance top and shoe are both wing type, the hook is the heavy duty type. I need 4 total for now. The windows are for a condo complex built in 1988 in Sicklerville, NJ. The group that I do work for own roughly 15 condo uni ... (cont.)

Hi there, I'm looking for a non-tilt window channel replacement but uncertain which product would match the top and shoe of the one for my window (see attached pictures). The existing (broken) channel has the following markings "28 3 GX CMC 11" -- Measurements as follow: 1/2" Wide Channel Ba ... (cont.)

This window balance measures 29 inches in metal length. Can you please advise me of correct balance. The window slides up to open. Thanks

The aluminum one is numbered 28DS48L. The steel one is numbered 2890R 48. they both came out of the same windows not sure if the aluminum one is a replacement one.The total length including the ends is 30 inches.

Length is 29". Need 4.

Please advise which series to order

No markings, channel balance is 29 inches long and 1/2 in wide

I have Alenco double hung windows. Can I use 2840 window balance to replace a 2830?

I have a kinco window, picture attached. The markings on the 29" long by1/2" wide channel are 28 o of BSI Can you tell me the replacement part number and price please? I have ordered parts before from you. Thanks!

It is 1/2" 2830 stamped on metal rail. Window will not stay in any up position and is coming out when raised on metal channel side (left). How do I repair and what parts are needed? jamie

Per my conversation with steve

I need to replace the channel balances in two sash type sliding windows. It's 29 inches long. Can you help me?

I need to replace 8 Gapco 2330 balances. I've attached images of the guide and shoe, can you advise which balances I would need to order?