Viewing all customer Discussions for:

S385-30 30" Series 385 Channel Balance

Markings: 29 90 1B 38 Length: 30 inches Also will need the top sash.

I need new channel balances to replace 20 year old units. The balances are marked 34 9 AR Caldwell. with the end guides they are 36 inches in length. The window units are hurricane resistant and are heavy.

Hello in one window I have such signs on the balance 29 9 CX CMC 4 I have these marks on the balance on another window 29 9 CX CMC 4 so what should I order from your catalogue. Than You Slawek

Channel Length: 30 inches Stamp: 2915 B.S.I; CM 2 sets needed.

Aluminum windows installed in 2001 built Florida home.

I need a few pieces to help me get the windows fixed in a house we are getting ready to sell. Two sets of two springs each. Here is what I know:Set 1: 30" long with no numbers printed on or stamped into the balancing rod. They are 1/2' wide. It is from a window that is a single pane 30' by 48'. I a ... (cont.)

Numbers on part: 20 4 HT CMC 4 21" long metal piece, 5/8" x 1/2"

Looking for 4 window sash guides and balance guides. Balance is 1/2" x 30" long. Sash is 7/8" at top 5/8" wide and 1-1/2" long

VERY difficult to raise window and wont stay in place. I think I need a 770 balance, 29D. broken string evident.apparent metal channel is 9/16" W on one side and a loose spring on the other side. Do I need 1 or 2 per window?

I can send more images if required. I need 2 window channel balances for both sides of a window. Once I have the part number I assume I can order through your web site. Thanks, John.

Trying to locate correct part to order need the pair along with clip for frame. The metal cannel is 30 in. Windows are from nuair

Need help identifying these and need them complete with all the plastic ends so I can just swap them out length of metal is 30" not including the plastic.ThanksDave

Hello, the balance length is 30". Could you please confirm which one should I get to replace it?Thank you,Ewa

My channel balance is 30 inches not the clips just the metal ,it has a number 29 4 on it , I need both sides

Single-hung, non-tilt. Lawson SH-7500. 30" channel length.

Hello, having trouble finding the correct channel balances to order. Metal channel measures 30" without the plastic end pieces. Thanks, Kevin

Hi,I believe I have S380 hardware on my windows. They are 30" long with "29 3" and "BS1" stamped on the 1" frame. I don't know what the weight option is. Hopefully you can determine that from the attached pictures. I would need sets for 3 double windows and 5 singles. Five of 8 pix are attached. ... (cont.)

I was unable to add a picture of the channel markings. I think they are 29 9 P) BSI The length 1s 30". Thank you for your help.

Channel balance is 30" Thanks, Chuck

Please identify these channel balances. Thanks!