Viewing all customer Discussions for:

39-371 Pella Hinge Shoe Pair

I have ordered part # 39-352 and #39-395 and the part that screws into the window is the wrong size. The size in the picture needs to be 8" and the 10" arm needs to be riveted next to the first screw hole like the picture. Do you have this part?

plastic slider sleeve for smooth glide arm on track window age 10 years

Do you have any instruction pages with illustrations that would show us how to replace the part 39-371? I would think such information would be of great help to those of us who have Pella windows that are continually becoming hard to close and that part breaking. The window that I am working on op ... (cont.)

I need the plastic slide located at bottom of my Roto casement window. The slide travels along the bottom as the window is cranked open. Is this part available? Thanks, Ken

Do I have to take the window off to get a new plastic slider hinge replaced and connected to the bottom of the window?

The nylon glide for my 1977 Pella casement broke in half and I have lost the half that is under the window sash. I have removed the screw head that stops the window from opening too far and I have slid out the serrated half of the guide. Can I buy a new nylon guide and slip the whole thing back with ... (cont.)

Today I received my order: #939109 Item #39-396LH 12-1/8

Painter/contractor says windows are quality wood casement windows in great condition, originally installed around 1980. However, the little (2")glides are worn. Although all windows are the same, we're uncertain whether they are made by Pella (due to labeling on window cranks) or "National Window" ... (cont.)

number 7758 on part, no manufacturer name on windows or hardware. Windows have been installed for at least 35 years.

Looking for slide rollers (part name?) for Pella casement windows that are probably 30 years old. The windows are wood with a vinyl clad exterior. This part slides along with top and bottom window sash when you crank the window open. Any help is appreciated.

Does any of your Pella casement 1 piece Bottom Hinge fit my Pella wood casement window vintage 1978, Bottom 2 piece Hinge with White Plastic Pivot Hinge with rollers? Also how do I order the white plastic pivot hinge pcs for left or right opening windows? These parts are left or right specific. I ... (cont.)

I have a number of Pella casement windows purchased in September 1987. I want to know if the following parts you list on your web site will work as replacement parts for these 1987 Pella windows: 39-363 39-371 39-394 39-395 If yes, will I need to get any other parts (e.g., new crank mechani ... (cont.)

Hello I need help identifying this Part! I have look and tried everywhere! I need to know as soon as possible! Thank you so much

Could you identify these Pella casement window parts. The one on the left in the picture is for the top glide and it is broke. The little circle on the left is a protrusion and the circle on the right is an indent. We will need 6 of them. The glides on the right side of the picture are for the bott ... (cont.)

Are these new/unused or used pieces rescued from old Pella windows?

The window has separated from the hinge shoe. How do I replace the hinge shoe???? How does it fit into the slide and to the window???

This is from an unidentified brand casement window. This is a plastic clip which helps hold the "hinged" side of the window to the frame while it is opening. I'm not certain of the correct names for the various parts.

I need all hardware to fix theses windows.please help identify. thanks, Todd

I need to repair a Pella code 39-371 hinge shoe, how do I do this?

I recently purchased and installed the 39-096 Pella replacemnt crank from you. The attached images refer to a small plastic/nylon slider that is supposed to align the window itself in the frame when one opens and closes t6he crank. Although not associated with the crank itself, this part appears bro ... (cont.)