Viewing all customer Discussions for:

38-277 Casement Sash Keeper

Picture is latch on right side, but broken one is the left side. No identifying numbers found.

Can you identify these parts so that I can order 6 sets. Let me know if you need any additional information. Thank you in advance. Jack

hi - so i had painters here and they removed the locks to paint the windows and they went missing. i tried to replace and the ones i got are slightly larger than the space allowed. ALSO why wouldn't you send the piece it locks in to as a set? Anyway i need that piece!. So is there a mechanism that ... (cont.)

Hi, I found a lock and a tie bar with item #s 38-091 and 38-916. My question is how the tie bar latches to window sash. There should be a keeper or rail that tie bar cone rollers latch into! Can you help me find that part? I don't have any pictures to send you since I'm building a wood window and ... (cont.)

I need help identifying these parts.

I need help identifying RH EntryGard Sash Lock Casement Sash Lock Keeper. Thank you, Sergio

I am looking for a part that fits on the top of a Weather Shield double/French casement window to secure the window closed. The windows were purchased in 2007. Do you sell a replacement for this part/

Marking on inside (non-exposed) of part: ruth 45428. It is white.

I have received my order of 38-144, however the new casement lock's plastic tab seems to be much larger than the original one and I can't bring the lock mechanism down all the way because I'm afraid it will break. Can you have someone from the engineering to look at the differences between the tw ... (cont.)

I live in Canada. Can't seem to find a Canadian dealer with this part. My crank works fine, but the lock "snapped" when I latched it THe following numbers apply: CCMC 9184 &11404 Brevet Can 1,160,, 103 Brevet USA #4,440 M90 A3,B3 C3, F2

The inside plastic piece broke. The window lock itself is fine. Can I just replace plastic!

Looking for a sash lock window was made around 1980s

I am a Handy Man working on a customers windows, & ordered some of these: (8) 38-075 : "Truth Hardware Low Profile Sash Lock" latches but they were slightly different. The latches I need are from Semco windows installed in 1996. on the underside of the latch, it has this number cast into the met ... (cont.)

I need window side lock. Please recommend the part. Screw holes are 2" apart. Thanks

I need hinges and locks for 6 awning windows. The part that attaches to the frame is 12" and the part that attaches to the window is about 24". These windows are 40" x 60" wood aluminum clad. These hinges allow the window to open past horizontal, although that is not completely necessary. I woul ... (cont.)

Trying to replace these, model number is on inside of the handle, thanks Eric.

Inside the latch is a picture of a house with truth underlined to right of house. To the left of the house is numbers 45189 with a 6 underneath. I also have a broken latch with a 45189 and a 3 underneath. There's a plate on underside with "21328A" engraved. That's same on both latches. I have ma ... (cont.)

HI We noticed all the keepers on tow casement windows are missing; evidently removed during painting and then lost. The crank indicted they are Hurd brand and are over 20 years old. I've shown the keeper latch in both the open and locked position. What do you recommend?

Hello-I'm looking for a replacement casement window lock for my wood Vetter Windows. The plastic mechanism that connects to the anchor has broken. It's the right window for a double window in my bedroom. If you can help, I'd be very grateful!

I have the 38-144 lock and then the secondary one on top. How do these work without the little pin that goes into the bar that connects them? Do I just have to replace both locks with one of these, so they work independently, and not use the bar? Thanks!