Viewing all customer Discussions for:

26-398 Round End Pivot Bar, 2-1/2"

I have a SWC double hung Vinyl Window. I need replacement parts for the following: -Metal tilt pin of the bottom sash -Metal receiving "drum" for the tilt pin on the side of the frame (see photo, both sides broke)

Hinge says H12 on it

This balance shoes use series 159 coil balance. the pivot bar with housing is 1173D.

It says 25 on the back. And a 6 or 9 on the topKarenMy husband says it is not the right one. It won't fit in the shoe. The bigger end

The left coil balance has an 8L marking and the patent number 6,378,169. The right coil balance an 8R marking and the same patent number. The pivot shoe has a U shaped opening the bar and attaches to the coil on the inside.

Need 6 of the coil balances, need help finding out the part number. Also one of the bottom metal screw on pins. Also the tool that opens the track to get the coil balance in.

Please let me know if you have this kind of balances.

we need replacement parts for our single hung vpi windows. we need springs, connectors and dowels. we also need directions on how to remove and install the new parts without cutting the frame. We are the homeowners thanksconnie

There are no names and numbers parts on the parts. The pictures show how the latch holds the window from sliding down.

This item is used for opening window on each side

Hi there, Looking to find a replacement for these pivots that broke in my vinyl window. I've ordered a few random ones from your site without any professional help and they have not been the right size? please let me know if you can help. Thank you!

The window weighs 28 lbs.

I have WinCore Windows in a home I just purchased. Sliding hardware was discovered broke. The bottom panel pivot/slide component is broken. When the window is unlocked to clean/wipe, the pivot rod at the bottom of the pane is broken. I hope this is descript. I can provide pictures. ... (cont.)

Windown pin broke and lost. The shoe is still in the frame track.

I need several pivot bars: 5/16" wide 2 7/8" long Holes @ 1 1/4" and 2" from head Head slightly expanded to look similar to a nail, with a flat spot following the head

I need a replacement for this window coil balance.

(Qty - Item) 1 - Window Sash lock 2 1/4" 2 - Pivot Shoe L 1 3/16" X H 1 5/16 X W 1/2" 2 - Tandem Coil Balance 7 & 9 7/16" band width The window sash is identical to your #90-305 but need it at 2 1/4" hole to hole.

Hello Swisco, I need two of these one Left & one Right. Please help ID if you can. Not sure of the manufacturer, maybe Curtain Teed. Fairly old windows. I hope the pictures help! Thanks!! Jerry

I am pretty sure you have what I need, my pictures didn't turn out great, but the scan of the part number did. Both sides of the coils broke, so I need both plastic parts and coil springs for both sides. Can you confirm what I have and what I need to order. Again, I will need both left and right ... (cont.)

I need this two parts