Viewing all customer Discussions for:

89-030 Multi-Point Striker

I am looking for the I believe it's called a doorkeeper? When the last owner put the door in they didn't put that keeper in place and they basically just kept the door locked with a broom handle. Thank you for any info NAMI: Series: Newcastle XT/ Insulate 960

I AM LOOKING FOR THIS DOOR LOCK ASSEMBLY FULL PACKAGE ITS A BACK YARD GLASS SLIDING DOOR LOCK. I AM UPLOADING COUPLE MORE PCITURES.THANK YOU ALI

I need to replace a missing sliding door latch keeper that was removed to install a dog door. Not sure of the make of the door. The label on it is deteriorated but looks like it reads SGD-R2(0?.) The door is 71"w x 78"h. The spacing of the mounting holes for the missing part as shown in the photo ar ... (cont.)

Hi, It is a Misguard sliding patio door (Supposed to be)The keeper is missing. The frame shows it had 4 holes for screws.The LATCH LEVER is broken. The one on your site looks different and has different dimensions. I found the model of the door.Can you please help me?Thanks

This lock lacks the part that should be in the door frame... the part the lock should "grab."

I have a Legance2 sliding patio door. The posts attaching to the locking mechanism broke, so I need to replace the whole unit. Note that the base of the handle is slightly curved (not straight). I also photographed the ID label found inside the right end of the sliding door. The base of the handle i ... (cont.)

I am looking for an inside replacement handle (or an entire inside and outside replacement kit) and a replacement screen door. Please let me know what other information I can provide. Thanks - BC

Mortise lock does not match up with handle set and attach to keeper (Stryker) one door frame. Please contact me with why it does not lock properly.Thomas

please can you help identify this . its a lock for a guardian slider 5 foot door. approx age 10 + years old

Hello. I am in need of keeper for this lock. Or a compatible one I can replace the entire thing with. Thank you

We bought a new house and the sliding door is missing the keeper so it can lock. It seems like this is the Newcastle XT/Bryn mawr std door. Do you have this part?

Our lock broke. I'm pretty sure it's a double hook mortise lock. I'll probably also replace the striker. Which striker would work best? 89-036 adjustable or the multipoint striker?

My door is 15 years old. Picture #4 (24731) is what's broke.It the inside of picture #5(24730). It won't latch to lock the door. Do you recognize or have these parts? Do you sell just that part or the whole handle assembly? And if so, the cost? Thank you.

I am trying to find out if you guys carry, a keeper for my patio door. In a new house and two of the sliding doors are missing keepers (I believe that's what you call them) for the locks. I have attached two pictures and it looks like the door is a Malibu Narrow Stile SGD-R25 and it's 120x82. Wo ... (cont.)

We are missing the part that locks into the handle. I don't know part numbers, just that it is a Newcastle XT/new haven sliding door. We took it off and attached it to a dog door which was subsequently loaned to someone who did not return it.

Unless your strike plate is on the stationary door of a 4 panel system. The strike plate looks like the photo attached. My question is where can I locate such a strike plate and the three screws necessary for the installation.

Hi, Love this tool, brilliant. I believe I have a milgard sliding patio door. The striker is missing and I am trying to track down that part. I think they key will be to find one that will depress the button and allow the lock to turn when closed. From the other posts, I believe I need the 89-04 ... (cont.)

The keeper for this patio door lock is missing. The distance between the outside ends of the holes where the hooks would latch need to be 3 3/4" apart minimum. The three screw holes where the keeper was attached to the door frame are in line and spaced 3.25" above and below the center one. The holes ... (cont.)

Hi, Today I received my 82-238 Double Hook Mortise Lock and 82-240 Multi-Point Mortise Latch Lever. I've installed them but now I can't get the 82-238 to release. It seems like the tab between the hooks needs to come in contact with the striker plate for the mechanism to work properly. I've enclos ... (cont.)

Hello, I just moved and the door handle on my slider on the outside (black handle) won't close with a key. It's not on properly and when closed up again the frame it's tough to turn key. What I want is a handle (like the inside) on outside with lock. I measured the spacing from the holes and it's 5 ... (cont.)