Viewing all customer Discussions for:

26-139 Single Hole Aligner

Hi, my old pivot shoe measures 1/2" thick, 5/8" wide, and 1 1/4" tall. Looking at your stock, I'll need something different. I'm buying the spiral (600 series for tilt-in) balances as well, but need to make sure I'm getting the right pivot shoes to match. Thank you!

Hey team. I have a number of windows that are holding up pretty well apart from yellowing of the plastic spiral balance covers, tilt latches and the little rectangular "plugs" you can see in the side of the upper/rear window frame. The "stoppers" at the top and bottom of the sliding channels for bot ... (cont.)

I have weather shield wood, non tilt windows (1986). there is a foam cushion that is on the bottom of the lower window(both corners)that compresses as the window is closed. Believe it is intended to prevent cold air leaks coming from the sill upward tthroughf the balance channel. channel is 1 3/8" ... (cont.)

I am not sure what this part is called. The 9/16" spiral balance slides through the center hole. We think it is a Wellington vinyl double hung that is about 20 years old.

Double hung vinyl windows. What can I put in that channel on the right to stop Wind from coming thru.

I have windows that are two years old. I have noticed air flowing thru the window jams. They are vinyl double hung/ single hung windows. I can't seem to find these anywhere. Could you advise. Thanks

It's me again. How do I identify these balance SHOES? Also, do I really need that white spacer thing? (one pic shows it with correct alignment, other pic shows it jammed at an angle). Do they come with the shoe or do I order them separately? regards,Eric

All are 27". Is there a difference between the blue and red tip ?Also need some window channel locks. Photo to come.

I would like to ask you (1) to please identify the window manufacturer of the frame shown in the photo. (2) I need to order pivot shoes and spiral balances for several of these windows and I think the S600-37 black tip spiral balance is right for my windows and the 15-046 shoe looks like my current ... (cont.)

hi, looking for two pivot lock shoes and locks for two of my windows. wondering if you can help. thanks thomas

I was wondering if you had any SINGLE HOLE ALIGNER but without the hole? Also I need to see if you have this style of sash stop? And my Pivot Lock Shoes is 9/16 Deep 2 in tall and 1 1/4 wide just seeing what one you would recommend. Thanks

do you have these or a replacement

I ordered some 26-139 single hole aligners to replace existing ones that have shredded -discovered during spiral balance and pivot lock shoe replacement. I'm finding the material to be more dense in the new single hole aligners I received, and I'm having difficulty reinstalling the snap in glaz ... (cont.)

I have a few windows that just fall down and won't stay up. It looks like there is no rubber in the track at bottom of each side. Please direct me to the part name..thx

Attached are photos of my existing spiral balance. There is, was appears to be, insulation stuffed up around the spiral balance. I'm assuming that I need to replace this insulation when I replace the spiral balance? Any information on this would be helpful.

I have 5/8" spiral balances on double hung tilt out windows from 1996 of unknown brand. Balances measure 31.5" and 33.5 inches of the metal tube. There is also a 1/2" foam at the bottom of each metal tube part of the balance which brings the length of the balances to 32" and 34" when I include the ... (cont.)

Do you have a replacement piece that is similar to the one in the picture? I find that this piece is wrapped around the spiral balance rod and appears to keep it in place. We currently have spiral tilt windows in our household.

Hi, I put an order about a month ago. For the ordered parts Series 600 Spiral Tilt Window Balances, are there any foam pipe insulation stuff with them? My old spiral title windows balances have some white foam pipe insulation stuff to affix to the balance end near the red tip. I could not find th ... (cont.)

Hi, Can you please let me know if you have some insulation that can be put around your balances? The window is very drafty and the draft comes from the vertical channels where the balances are installed. Any advice would be highly appreciated. Thanks a lot!

d