Viewing all customer Discussions for:

81-272 1-1/2" dia Roller And Axle Kit

Closet doors are about 35 years old and the only information on the wheels says: Production Enterprises Miami, Florida

Hi- the wheel broke to our sliding glass door. House was built 1968 in Hollywood,FL not sure when doors were updated

As I look at this and understand it better - I may just need to replace the 11/2" wheel? You know better than me. If so, these are nylon wheels would a steel wheel be better? Thank youswapping door hardware I believe the only piece I need is the nylon 1 1/2" roller with the ball bearings. The pre ... (cont.)

This is for a five foot sliding door.

Aluminum screw sheared off this carrage. 1.5" wheels on inside concave. I can replace screw...do u have a better replacement carriage? Its held in place by a steel dowel. If not, need 4 wheels. Dowel pressed in as well on wheels. No to nylon wheels.

Hi, I would like to replace some sliding glass door bearings. I need 4 sealed bearings total. 1.5" x .25" Also 4 pieces of furry grey or black weather stripping. (Or if there is a better product you recommend.) .25" insert tab width. Length 36". Depth 3/8" Thank you, Jesse

I can not find a similar roller.

The patio door was installed in 1957. i need to replace the roller and am not sure of the part. I dont think it is still being manufactured, but need to know an equivalent part?? thank you

Sliding glass door from 1968ish handle/ latch says Klein, wheels say Kilian Syracuse N.Y. Tronto Canada., would prefer something heavy duty, as this is an exterior patio door and heavy. The adjustor screws are very long compared to most of the ones you have displayed, a little over 4 inches and one ... (cont.)

Patio sliding glass doors are from the late 70's and I can't find a replacement. Would the 1-1/2" dia Roller And Axle Kit Product Code: 81-272 work. All needed is drill the old axles out and use new screws? Would Nylon wheels be better?Thanks!

Looking for double 1 1/2 inch rollers for patio glass door

No markers just the pics if you need more please let me know.also if you can determine the make of door i nee the door handle and lock system the house was built 1976 i purchsde the home in 2010

Hi. This patio roller comes from an early 1970's aluminum framed patio door. Can't find any 2 piece patio roller styles. Is their a newer replacement? Help. Thanks.

looking for replacement roller asys

I am looking for the part in the photos. It slides in the bottom of the door and holds two 1 1/4 to 1 1/2 rollers. .

Have an old slider from early 60"s measurements kilian name on roller, syracuse, ny 1 5/8 inch diameter roller assembly 2 pieces adjustment piece 1 7/8 inch roller and assembly together 2 7/8 inch 2 1/4 inch without roller 1 1/2 assembly togeter 13/16 thickness or depth

Hello. I have a vinyl sliding glass door with tandem rollers that look like your part number 81-156. The only difference is my rollers are 1.5" OD and yours are 1.25" OD. Will this be a problem?Thanks.Ken H.

This part is to a sliding glass door. I'm remodeling a house built in 1964. I believe this door is original to the house. There are 2 of these assemblies. The panel that they go under is a 4 foot panel. There is not a brand name on the door.

Please help us find a Double Roller matching attached measurements. Once identified we will order immediately. Thanks Charles

Do you have this part with Steel wheels? Thanks