Viewing all customer Discussions for:

82-260 Multi-Point Mortise Lock with Pocket Plate, 12"

These 2 numbers were on the lock. #6264252 and #5820170

Mortise lock: patent number 6.264.252 handle is patent number Amesbury Hardware: D466787 cover plate for side of sliding door is inset and has CS marked on it. I have photos if needed . I live in Lakewood, CO . suburb of Denver . door has a heavy metal frame that the mortise locking component a ... (cont.)

I need a double lock that measures 12" to center on installation holes. The one pictured on the site is 11"

Need to replace this sliding door mortise lock. The entire mechanism is approx 13" long. Thank you!

It's an older weather shield wood door wall

I purchased this replacement handle and installed it yesterday. The thumb lever was broken on the old set. The thumb lever works now, but the key is extremely hard to turn and I cannot get enough leverage when the door is shut to get key to turn far enough to lock the door from the outside. I use ... (cont.)

Keynetic Imperial USA Sliding Glass Door Handle Looking for replacement door handle with lock for the sliding glass door to the patio. It is 6.5 inches long by 1 inch wide (if including the handle it is 2.5 in wide). I am attaching photos. It is gold tone. Please help me locate the replaceme ... (cont.)

Hi there, My lock on the sliding door to the backyard was recently broke. I'm looking for the parts to fix it. I've attached the pics showed the series number. Does your store have this part？

What do you suggest to replace this mortise lock and keeper. The backset on your 82-260 is not as deep as mine. Also My back set has right angles while yours is tapered.

Hello, The double mortise lock is broke (the top latch gets stuck in the locked position). Do you know which lock I need to purchase buy these photos? Or do you need me to remove the lock and take pics? Thanks!

I bought the 82-265 and it isn't long enough to match up to my holes.

Door locking mechanism broke. Not the handle or the price you switch to lock the door. Just the inside price that locks the door. It doesn't drop down enough to latch . Which locking price should I use . My dad dropped it in the slider while looking at it but I will upload some pictures of our slid ... (cont.)

Mortise and handles with lock Thanks in advance

Does the handle come with the part also, if this is the correct part?

I am looking for a latch assembly for a sliding door. It is a double latch lock. Not 100% what the manufacturer of the door is but on the handle it says JW. Overall length is 12 and 1/2 in from Center of bolt hole to bolt hole is 12 in. If you can help me find this latch and handle assembly or somet ... (cont.)

This door hardware lock is malfunctioning and needs to be replaced...I am using your service.....will search for more ID

I have a door with locking mechanism but not sure if these are standardized sizes. It?s a double hook mechanism

I have 11 year old sliding glass door wood that is metal clad the cartridge is mortised in. The gears are worn and it no longer locks properly. My windows are Windsor and I think the doors are also

This is a Gorell sliding patio door. The door is locking itself when it is closed. We believe the part we need is the multi-point mortise lock with 12? plate. I found a very similar product on your website, but my service tech doesn?t think the ?hooks? are right. Please look at my pics and see if yo ... (cont.)

My lock keeps locking upon closing. The only markings on the lock are "this side up" and "SA" stamped onto it. Ithe lock is 9 inches with a 12 inch cover/faceplate to it. The double latch are bout 7 inches when in the locked position. Thanks.