Viewing all customer Discussions for:

82-260 Multi-Point Mortise Lock with Pocket Plate, 12"

Hello, my handle is fine, however the inside mechanism broke, how can i find a replacement?

Bought house 4 years ago. Both sliding doors have this handle and lock. The family room one does not connect anymore and does not lock. We tried moving the stick plate, but it does not "connect". Do you have replacement parts? It is 12" in length. And the screw holes are 1". Can we just replace the ... (cont.)

It looks like I need the 82-260 door latch/lock. But I can't figure out how it goes back together. Is there an exploded diagram or assembly instructions? When I put the handles up to the latch, the blades on both the inside and outside handles (at the lock knob and key) are in the same place, but bo ... (cont.)

Attached are photos of my sliding glass door lock. It is very similar to your part no 82-265, only slightly larger. The distance between the main 2 mounting screw holes is 12", it is 12.5" long over all, and is 1" wide. Do you have one of these? Thanks!

I have the paperwork for a PD3000 double mortise patio sliding door. The locking mortise is rusted and has become inoperable. The paperwork list this part as a PM520A. The keeper is part PM530. Do you have any thing like this for replacement? The door is white and handles are white also. ... (cont.)

Anyone know where I can get this?

Hello, I need to replace this lock. It has two different part numbers. I included them in my pics to ensure accuracy. Please let me know if you have this lock. Thank you

Hi. I'm looking for a replacement for a double hook mortise lock on a Jeld Wen sliding door. The flange hole center is 12". The locking mechanism mounts to the flange with screws on 4" center. There's patent # 6264252 on the mechanism. Any suggestion for a replacement part? I really just need t ... (cont.)

Need to replace or repair patio door lock - the spring inside has quit holding flip lock in "lock" position. Do you sell parts and or total sets? Photos attached:

On the 82-260 lock are the door handle holes at 3 15/16?

QC-PASS 2777-00 6/30/10 Need the outside plate The end broke off. I can buy the entire lock if you can match it.

Trying to locate this lock mech plate that has broken-causes door to get stuck in the closed position. Notice you sell the locking mech, any ideas of where to find the plate?- Appears to be Lock mech style 82-239

Looking for Atrium sliding patio door (Model 311/312) Double Hook with keyed lock and "C" handles; Brass. The Atrium model is approx 12-1/2 total length, uppermost screw to bottom most screw 11-7/8" and hooks 7" on center. Similar to your double hook pictured on your web site except dimension and co ... (cont.)

82-260 want other parts that are used together wit this part

Hello, I have this approximately 95x95 Pella glass sliding door in need of parts. Do you have replacement parts for the Lock Strike, the Lock, the interior and exterior door handle and by chance a reference for the rollers on the bottom (I don't have a photo of the bottom track rollers). Attach ... (cont.)

This lock has failed. I would like to replace it. More photos upon request PAT #: 6,264,252

Need replacement mortise lock 12" between mounting holes.

On your website under 82-239 customer questions, a contractor fromSt. Louis, Mo., on Mar. 7, 2017, submitted a picture of a mortise lock he needed. I am in need of the same lock as mine looks exactly the same as his picture. You suggested 82-239 as a possible replacement. Based on the dimensions ... (cont.)

Lock freezes...very difficult to open. I'm not sure exactly what needs to be replaced and what parts are needed. Steve

This goes on a patio, sliding door. I saw a swisco photo on the internet that most closely resembled what I have.