Viewing all customer Discussions for:

18-015 PGT Top Sash Guide

This is part that keeps channel tension spring in place

Hello, I need replacement window channel balances for my PGT non-impact single-hung window (approximately 25 years old), and also the top sash guides you see on the pictures. The marking on the metal channel reads: 17-1-PA BSI.The metal channel measures 18 inches long (metal-to-metal, not including ... (cont.)

It is. 1/2. By. 30 inches channel Balancei also need the piece that goes on the window itselfthanks, Dr. William

Hello, trying to identify my window sash guide. The house is a 2007.

It appears to be a left and right one

Need new parts and I have two kitchen windows that I can not buge up or bring the balance track down. Can you help me

What are these parts?

I’d like to purchase 12 slider elements as shown in the attached pictures. I’m replacing all the sliders for six windows, so I believe I need six for each side in this size. The code on the slider is: 29 4 EW CMC 10, and the metal piece is 30” long. I’ve included photos sho ... (cont.)

I have tall PGT windows with broken top guides I believe are your 18-015. I also have channel balances which might be your 37" Series 395. I've attached some pictures. Existing balances are marked 36-4 CA2 CMC 7. But window widths and weights vary. These balances seem too strong and stiff movin ... (cont.)

Hi, I have several broken sash guides on my PGT SH-4000 windows. Which part would I need for repair. I love you instructions on your site.

I don't know how to correctly measure the sash guide so I took a picture and hope you can identify it for me

Can you help identify my PGT window and sash? I will need to order replacement parts for several plastic items,

Please help identify correct part. How much it would be. Also new clips. Measurements Length 30" width 1/2", hook included in full piece photo. The windows are PGT. Home was built 2006.

The little bubble stops it from going in the top of the window. Should she file it down?

I purchased 10pcs spring balance (2965 to replace 2950)from you. I now need the shoe that fits. See photo of shoe that I took off one of my windows. Can you find the part number? Bob

I'm needing to replace about 18 top sash guides. Thank you in advance.Aaron

Sash stops

This is the mate to the broken sash stopper. The white is paint but the original part is brown. The white top is 1 inch wide and the top is asymmetrical as evidenced in the photo. From end to end is 1 1/2 inches and the channel it sits in is 1/2 inch wide. Thank you for your help. ... (cont.)

Guide is plastic. We have done business with you in the recent past and very happy.Need replacement parts for PGT window. Plastic part. We need 4. Thank you.

See attached pictures. Both from same window. I also require the tab that holds the spring mechanism, as that has snapped, as well.as the two plastic pieces that attach to the windo frame Thanks !