Viewing all customer Discussions for:

33-104 Phillips 1/4-20 x 3/4" SS Machine Screw

2.75 x 11/16 wide x 1.375 H frame w/ 1.5" diameter wheel OA height 1.75 No adjustments. Screws in from bottom with two #8 screws, 2.25" on center.

No markings identifying manufacturer. Sent picture of door locking mechanism to assist id. Steel wheel appers to be about 1 1/2 inches. The roller has two screws one on top 3/8 from end to attach to frame and one on the end about 7/8 inches from the bottom to attach to the exterior of the frame at t ... (cont.)

I need to replace two rollers on my patio door. The following are the dimensions:2-7/8" total length3/4" width1-3/16" height1-1/4" wheel10-32 machine screw on topPlease let me know if you require any additional information or photos. The wheels are nylon and there are two markings, "970" and "Parlyn ... (cont.)

Can't find any numbers on the hardware. But the brand is "Ultra".

2478 A-S NYC are the only identifiers on this part. I removed it from the bottom of my sliding glass door. It's a single wheel piece original to the house, circa1963.If you could replace the part or recommend a replacement part that would be great!1 5/8" on wheel height13/16" mechanism widthThanks f ... (cont.)

Greetings, I need to replace the rollers on my patio door. The dimensions are:2 1/2" x 5/16", the wheel is 15/16". Please help image.jpg Rob

I need a replacement top guide, similar to your part 86-025 but mine is only 7/8" wide that must slide into the frame. Im also looking for better rollers, I have 1 1/2" PLPCI.net D 1822 rollers, look like your 81-261 product but they are so noisy Is there a replacement that has poly wheels? I nee ... (cont.)

Nylon wheels have lost their edges. Looking to replace wheels. Is the wheel assembly available so I don't have to punch a rivet or drill anything? It popped out easily, hoping to pop one right back in. No markings found.

I have removed both the anchor and adjustment fasteners from the ends of the door, however the roller acts as if there is another (fastener) anchor possibly on the top of glass edge that prevents removal of the roller assembly? It also appears that the dust seal slots may also interfere with roller ... (cont.)

Hi, Would greatly appreciate help finding a replacement for this sliding glass door roller assembly. The only marking on the door is "Alenco, Bryan Texas." The house was built in 1986 so presumably the doors is from around the same time. The diameter of the wheel is 1 1/4 inch and the total length ... (cont.)

HI, I AM TRYING TO ORDER THE CORRECT DOOR TANDEM ROLLER FOR MY PATIO DOOR. I THINK THE ITEM I WANT LOOKS VERY SIMILAR TO PRODUCT CODE: 81-138I WOULD LIKE TO PURCHASE X2 OF THESEI WOULD ALSO LIKE TO GET NEW SCREEWS FOR THIS PRODUCT CODE 33-071 X2AND PRODUCT CODE 33-104 X2I SHALL UPLOAD IMAGE AND D ... (cont.)

ball bearings crushed in this roller door track in good condition door is heavy hired someone who took out rollers was able to replace front roller from HD we'll see how long last MH home Palm Harbor built 1991 so assume sliding doors to sunroom installed at this time. I hope pictures are visible. I ... (cont.)

took out of very old aluminum frame door

..

The diameter of the wheel is 1 1/8". Note: the photo of the part outside of the door is very bent from removal. there is a hole for a screw on top of the part (see in photos) that holds the glider in place. If helpful, the manufacturer of the door was patio enclosures, inc.

I need to replace two rollers. The rollers have a specific fit to slide into the aluminum framing. I have one roller that works and allows me to adjust the height, but the other screw on the other older is rusted frozen. It says PATIORAMA on the door handle, and was likely installed in the late 6 ... (cont.)

Need to figure out what the replacement part is for this

Looking at the Del Mar web site, I believe this unit is SKU#F3727. I'm pretty sure this is a 1 1/4" wheel. These are used in a pool environment, and the doors become very hard to open or freeze up after a few years. We need 10 of these units. Would stainless steel or nylon wheels prevent this? ... (cont.)

Searching for replacement part for this sliding glass door this is approximately 50+ years old. Looking for complete roller kit or the tool used to extend or retract the roller within the kit. Many thanks

Need 2 of this kind