Viewing all customer Discussions for:

S395-29 29" Series 395 Channel Balance

Description: 28 3 FU CME 4 It is 73.5 centimeters long

Metal channel balance bracket is 29 inches long X 1/2"-9/16th wide/width. One photo is showing the markings on the Channel balance unit

28 3 ax cmc. Marking Balance is 29" long

Marked 28-3 LX CMC 11measures 29" long x ½" wide excluding plastic head/footWould have been originally installed around 2005looking for suitable drop in replacementThank you.

Only writing is 2830 with an upside down Y and B.S.I the metal channel is 29 inches. looking to see if you have a replacement for this. Thank you for your time.

29" 2830 EG B.S.1.

The metal part of this items measures 29" long. Stamped on one end as 2840 BSI FL. I anticipate needing 4 of these. This is my second of two requests to identify my parts.

This is the second window channel balances also say 2840

I have three windows that have damage to one or both of their channel balances or plastic end attachments and they need to be replaced. I will send in three different requests as to not get the pictures mixed up. Here is the first set of pictures for the biggest window. The channel balance says 2 ... (cont.)

Hi-my-widow-balance-are-2830

I need to purchase a replacement channel balance for a Viking window. It was installed when the house was built, in 1988.The nylon attachment atop the channel balance on the right side of the window (as you stand facing it) broke. The spring inside the channel balance broke too.The channel balance m ... (cont.)

SWISCO Team, Enclosed are 4 photos for part number Stamp 2820W The channel length for each window is 29" These are 2 Different Viking Windows Need 2 Channel Balances are for a 34" x 29 ½" window Need 4 Channel Balances for windows 22 ½" x 29 ½" window

First, greatly appreciate it if you can assist me with this effort and apologize for the length of this message but I figured more information was better than less. I need to replace the channel sliders for a couple of my double hung windows (photos are attached), and since the windows are 15+ year ... (cont.)

Need correct part number to order, will need qty of 4 at this time for two windows. Thank you, Randy

Looking for replacement parts. Metal piece is 29 inches. Width is 0.5 inch

Need Viking balance # 2830M Thanks Jim

I took this off the right side ( from inside of home looking to street) of a non tilt metal dual pane atrium window. The window will not lock. seems to be 1/8 off from latch catching.The latch on the movable window needs to go down about an 1/8 to catch or top window up 1/8" " I checked the fixed w ... (cont.)

29" x 5/8"

My widow balances are 29 inches in length and marking on it says 28C. I am trying to identify the part number I need to order from you.

Mark 28-5 FL Caldwell, thanks