Viewing all customer Discussions for:

S395-29 29" Series 395 Channel Balance

I have 2 windows that have bad balances. They were crumbling but these are pics of the most intact ones. The stamp says ub 28d. The channel is 9/16" x 29". The windows panel is 35width 32high.

28 3 GV CMC 7 needed, I will replace 2

Good morning,I need four 2830 sash balances for Viking metal windows. Attached are two photos each of each end (four total) plus a photo of the inscription "2830."Can you help me?RegardsPat

Viking Windows fromm late 1980s or early 1990 (home built in 1990/1991). Two different size windows - 29 and 23 inch channel length. Each stamp is shown in labeled images. The width of the top fitting is about 1.09 inches (caliper read), so 1 and 3/32 inches.I need 4 of the 29 inch and 2 of the 23 ... (cont.)

Single-Hung Sash Balancer, 2810 I can't find it on your website. Can you please help me find the right part?

Good morning! I have four Viking windows and all four need new sash balances. I hope you can help us. Two of the windows each have two size 3430 sash balances. And the other two windows each have two size 2830 sash balances. Both windows use sash balances with identical nylon guides. I've attach ... (cont.)

Hello, I am seeking a window balance pair for a 1989 viking non tilt sliding window. The channel measures 29 inches long and 1/2 inch wide I believe. There are ears on the upper plastic piece but not the lower. Thank you

It measures slightly over 29 inches x 5/8 x 5/8". It has the number 2820 stamped on back.

Need to replace 2 Channel Balances, past customer.

This part was installed in a cabin about 2008. We just bought the property, and discovered that channel balances on both sides of this window are not working. All the other windows work fine. The channel balance is 30 inches long, including the mounts at either end. The string is broken and the pull ... (cont.)

Can you confirm which replacement parts I need for a Viking vertical sliding window: channel balance for a 19 pound window portion and the locking mechanism? Thanks!

I'm needing to replace some side channels on gapco 100 series windows.

I have a balance with the following markings 28 3 BW CMC 5. Can you cross it to one of yours? The metal channel is 29 inches long but I'm not sure how to measure the foot.

Hi, Could you please confirm the part number? this appears to be a 28" series 395 channel balance, but it measures 28.5". Stamp indicates 27 1/2" 3 Caldwell DM. Can you please confirm length and appropriate option?

Markings: 2830F B.S.I. 2830I B.S.I. Dimensions: 5/8" depth 1/2"-9/16" width (open end of U-channel is slightly wider) 29" long (metal channel w/o plastic parts) Thanks!

Hi Iam looking for caps and balances the number stamp on side says 2840 but from end to end of metal 29 in thought the first number was for length I need four of them and 8caps if u have them thanks

Trying to identify replacement balance for Viking #2830Y

Would you help us identify the correct replacement part to order? Metal is 29" long. Stamp: 28 3 HX CMC 11 About 20 years old.

Hello, this is Jason. I have 8 windows that are all the same and they need new balances. I have attached pictures of both of the ends of the balance currently in there now. The balance measures from metal edge to metal edge 29". It is the 1/2" (or 9/16") wide balance. The window sash is roughly 19-2 ... (cont.)

29" long.