Viewing all customer Discussions for:

15-001 Channel Balance Shoe, 1-1/8" Depth

The balancer I removed are marked 25 9 37# 19" LT JQ Caldwell Upper plactic has wings but lower plactic pieces dont

The length of the metal portion without the clips is 25 inches. I need to buy a large quantity as well as a lot of take out clips. 2430

Hi - I have a sash non-tilt sliding window that has two broken channels on it (the hooks broke off which renders them useless). The home was originally built by Ryland Homes and the windows are made by BFS, at least that's what's stamped into the locks. They have not been replaced since we are the o ... (cont.)

I need to replace a pair of balances on one window. It has never worked since we moved in. As seen in the photos, they are 30" long, stamped with 2990EG B.S.I. 32 In the photos showing the end attachments, it shows both balances side by side. Please help me figure out the correct balance for my ... (cont.)

I have a 26" channel balance that has a shoe that doesn't match any of your option. Plus from the photo of the stamp on the channel, does that indicate what type of weight I might need?

I believe that I have a Series 351 with a 15-002 Shoe and a 19-002 Top. Please see photos to verify. It is hard to see the difference between the 15-002 and the 15-001 Shoes in your photos. The Top & Shoe are almost the same color with the Shoe being slightly more yellow. The only marking is "2 ... (cont.)

Hello, I am looking for replacement sash Balance for 2 Vinyl NON tilt windows. the current balance are 28inches X 1/2inch wide. The only marking reads: "27 14L ok BSI" Could you suggest a replacement part? Thank you, Igor

Hi, I need to replace my half inch channel balances in several older, aluminum windows. I have attached pics. Taking cues from an earlier post, the foot does seem to be 1&1/16 inches. The top appears to be a 19-002 and the foot appears to be a 15-003. I need the complete assemblies for 29 inch chan ... (cont.)

I have been to the website and have a few quesitions on the widow parts I need. The Top Sash Guides are the biggest mystery. I could not find an extact match to the ones in the window and hope you could suggest a match that would work. Please see the photos. The I believe the balance rods I ne ... (cont.)

I'm need of replacing the spring balances but would like to know about the bottom being different from the illustrations that you have. Are the bottoms interchangeable? I'm asking cause I've got what looks like a 15-002 or 15-003 bottom yet the 15-005 appears to be a better choice to avoid the bra ... (cont.)

I have an Alenco window, the channel balance is marked 2740 BMI. See attached pics. Can you tell me the correct part number to replace it? Thank you

I need to replace both balances and sash guides on a window I am repairing. The window is non-tilting, 1/2" balances, 29" long. The stamp reads, 28 3 CALDWELL LM. I am having trouble identifying the correct shoes and guides, so am sending along photographs. Your help would be greatly apprec ... (cont.)

I need a pair of balances for 21year old Kinco single hung non-tilt window. Your series 351-15 looks like a good fit except my balances are stamped 2440BB and elsewhere B.S.I. Can you supply the correct balances for this window? Pictures are attached.

I need help confirming replacement channels. The channel is 34 inches and 1/2 inch wide The imprint on the channel says "33 5 HO CALDWELL" thanks, David

I have Alenco windows, and the metal tip-to-metal tip is 28" long. "2740" is stamped on one end of one side, and "27C" is stamped on one end of the other side. Attached are pictures of the balances. The first 2 are one end of balance-1. The 3rd is the opposite end of balance-1. The last two are of 1 ... (cont.)

I framed homes for a living so i guess i would call my self a handy person:-). Looking to replace all balances in house we have 10 windows that the balances are stamped 22b B.S.I. And we have 3 windows with a 16b B.S.I. Stamp on balance.n Can I order a balance from you that would be compatible ... (cont.)

I need a 1/2 inch channel replacement for my window 30 inches long but how do I know which series to use?

the markings on the piece i took out the window is: 2990BD BSI34 1/2 or 9/16th measurement the foot length is 1 inch.

I need Window Channel Balance L & R, 28 in. ( ALENCO )

Hi, The channel is 20 inches long. The bottom shoe has wings and measures about 3/4. The top shoe does not have wings and measures 1 1/16. Please see additional pictures attached.