Viewing all customer Discussions for:

15-001 Channel Balance Shoe, 1-1/8" Depth

Looking to identify and then purchase new channel balances for windows in my home. I only found one marking on one of the broken ones: 223OZ. These are kind of old, probably 20+ years. Attached are some photos to help. It is 23 inches long (1 ft, 11'')

Hello, All the pulleys in my balances have bascially disintegrated and all my windows will not stay up. House was built in 2003. My balance is 28" long and has the following numbers stamped on it: DB L02 2730. Measured with is 9/16". My windows are Non Tilt. It has the winged top which ... (cont.)

I need to replace an 18" long 1/2" channel balance. Your series 390 is the closest match but the balance I have has a 19-005 type top instead of the 19-002. What do you recommend?

I am seeking replacement balancers and accessories to replace balancers with the following code printed on the existing balancer: 28 4 AX CMC 7 The above balancer is 1/2 wide and the metal portion is 29" long. Please give me the correct part number for the balancer and the replacement plasti ... (cont.)

My broken balance is 28" 2740 Top is 19-005, Shoe is 15-003 I need two balances. Can you tell me costs.

Here are some pictures the size is 1/2 inch by 22 any help would be greatful

I have a number of 1/2-inch channel balances that need to be replaced. The markings are "32 3 FT CMC 2". What do I need to order to replace it? I included photos of the OEM channel balance, although I have used a 3130 in the past that I was able to locate locally. Thank you, Mike ... (cont.)

Hello Paul, The windows in my home were manufactured by Superior Windows in Ontario, California. I have several single hung, dual glazed aluminum windows with the following numbers stamped on the balance: 23 4 JT CMC 2 . The sash is 32 X 36 dual glazed (heavy). Can you help identify the top and ... (cont.)

the stamped number on one balance is 26 D and the other is a 20 C. Are the balance's available for these windows and what is the cost the metal clips that attach to the window to load the balance has broken on both models Thanks for any help Wes

I need a replacement channel balance for a part marked 2530 BSI that is 26" long and 1/2" wide. what do you recommend?

I am looking to find a cross reference to the pictured channel balance (Photos attached)

I have Kinco windows in my house and I need to know if you have the spring loaded guides that are on each side of the window. The part is 31 inches overall measuring the white plastic tabs and the metal measures 30 inches. The window measurements are 46 wide and 31 inches tall. I know Kinco is no lo ... (cont.)

Hi - Attached is a picture of my balance. What model do I need? I have both a 20 lb sash and a 27 lb sash. However, the windows are the same size and the balancers ends and size are identical. The body length is 32 in. and the width is 1/2 in. Thanks, Terry

I need to replacement my channel balance and order take out clips. My channel balance is 28 inches and the stamp reads 2740 B.S.I. and a upside down R

this is the # 23 4 FU CMC 4

Hello I got your company name from my brother in law as you helped him get fix it parts for his window. I am in need of 2 new Non Tilt Block and Tackle Window Balance for my windows. Both of my balances have broken and I can not find parts around here. The balance dimensions are as follows length ... (cont.)

Thanks for posting, Mark. Based on your stamp, I'd recommend our 2550 option. This can support a window sash weight range of 25 through 28 pounds. Does your sash weight fall within that range? Let me know!

I have a broken window balance in one of my aluminum windows I would like to replace. The only stamping I found on the balance was 27C B.S.I. My home was built around 1985 so would you have a replacement balance for this window. I also have 6 other window that are the same so I would like to repl ... (cont.)

Hi, Please help me to identify my broken channel balances. There are only some ink printed characters on the metal that reads "29 9 38# KO CALDWELL". There is no other identification on the channel balance. Enclosed please find the top and bottom brackets. THANKS IN ADVANCE. Tim

I need a set of channel balances for window. Stamp is: 27 9 LV CMC 7. Did not see exact match on your picture choices. It measures 28".