Viewing all customer Discussions for:

15-004 Winged Channel Balance Shoe, 1-3/32" Depth

I have single hung windows without any identification on them, making identification of the sash balances very difficult. The biggest problem I'm having is identifying the end pieces. With measurement differences of only 1/16" in the stock pieces I'm finding on the internet, I'm not sure what the ... (cont.)

Hi. I need to buy 2 balancers for my Milgard single hung windows. The length of the the channel is 30 1/16", not including the plastic attachments. The shoes is about 1 1/16". The stamp on the balancers is 29 9 IU CMC 7 Thank you

Need 3 pairs or channel balances. Lengths are 26, 26, and 32. I have what I think are pan am clips on one side of each window. I am unclear how these work and how to use them to install new channel balances. Thanks, Anne

12" long x 1/2" wide 11 2 HQ CALDWELL From a small Millguard bathroom window It looks to me like a series 380 The winged shoe looks like 15-005 Thanks. Richard

I have an old windowmaster, vinyl, single-hung, non-tilt window whose left channel balance broke. The balance is 24" long and 1/2" wide. Markings on the channel are "23DS" perpendicular to this marking there is a smaller "BSI" (or 1?) next, a small "OB," last, a larger number "36." I want to know if ... (cont.)

number on unit 2740

Hello, I am trying to fix the windows in my house. I live in an MI Homes house built in 2004. Some of the windows are starting to fail. This is the piece that I removed from the master bedroom window. It measures in at 30in. and has a spring and a pulley system on the other side. I wanted to sh ... (cont.)

i need to replace multiple channell balances they are 33 inches in length and 1/2 inch wide.they are stamped 32 4 fo caldwell. they resemble four of your series. If you could let me know which ones to order that would be great. Thank you

there is a 2740d marking on 1 end. The balance is 28" long. It appears that S350-28 is the correct slide. 28" I included pictures and wanted to verify that it is compatible. I need 16 slides, but do not want to pay $12 to test 1 slide, when shipping for all 16 is around $23 Thanks. ... (cont.)

Hi - I have a non-tilt Fiberlux window that does not stay up. I have pictures and measurements of the channel balance as follows 1/2" wide - 22" long - Item No. 21 3 or C (not sure - pls see picture below) I have seen many videos, but there isn't one out there that shows how to replace the ... (cont.)

I need know what part needs to be order , I need the whole side rail with plastic part , metal bracket , spring .

Looking for a channel balance. 15" length. Appears to have a 15-004 bottom (1 3/32" and ears) and perhaps a 19-005 (ears) top like the 385 series, but the top has 2 steps instead of one like the 19-005 seems to have, perhaps inconsequential. Also, the sash weight is 17lbs as measured on a bathroom s ... (cont.)

We have included pictures of the balances for you. They are pretty mangled so hopefully you can still identify them. The metal section is 28" long and the only markings we found were the numbers 2740 and the letters B.S.I. on the metal section. I guess my one area of concern is that the one sh ... (cont.)

I have a channel balance that I need to replace. The numbers that are on the channel balance are as the subject says: 26 5 FV CMC 2.

i am not sure what these things are called ,these keep the window in balance,one is 55 cm long has marking on it as follow;...[21 4 c? Caldwell] [? means scratched letter or number] the longer one has the marking [33 5 LS Caldwell]and is 33.5 inch long

I have a balance with markings 26 DS 45 PT BSI. The metal channel measures 27" by 9/16". The window measures 27" tall by 50" wide and is very heavy, Maimi-Dade code hurricane impact version. It has 2 springs, one inside the other, looks like your 385 series. Any chance you can match it? Thanks. M ... (cont.)

Hi I would like to know if you have the following window balance available: The balance is stamped 1540. It is 16 inches long not including the top and bottom attachments. The width is 1/2 inch. Attached are the photos of the actual balance and serial #. Thank you.

need a set of sash weights for a vinyl window- early 90's - Viking brand? old part is labeled "26 4 AN CALDWELL" - do you have these? I can send photos as well if needed? Thank you , Luke

1/2 inch balance need to replacement four. I believe 26 inches in length.

We have a Linder window that won't stay up. It appears that there aren't any "rails" that would guide the window up and down / hold it in place. Basically the window is just kind of sitting loose in the frame. (We have NO idea how this happened, but we think it must've been like this when we boug ... (cont.)