Viewing all customer Discussions for:

15-004 Winged Channel Balance Shoe, 1-3/32" Depth

23 inch (1/2 inch) Side Load Single Hung Balance Springs. The Balance Springs are stamped 2220v. I think I need Series 380 or 385 but I cannot tell the difference. Pictures are attached. I also need Top Sash Guide. Picture are enclosed. I cannot find anything to match. Do you have any ... (cont.)

I have a non-tilt window whose channel supports are in need of replacement. I looked up the id marking online which brought me to your website. However, I cannot figure out what replacement part to order. I've attached pictures in the hopes you can guide me on what to order and how to install. ... (cont.)

Hi There, The metal portion of the balance is 27" long and 1/2" wide. The top is 15/16" wide and 3/4" deep and the bottom shoe is 15/16" wide and 15/16" deep. The sash weighs 23 lb. It looks like I should order a series 380 but I am not sure. The window is really hard to close and I think it is be ... (cont.)

I need help to identify the part. If you need more information please let me know.The length is 22".

Dear Swisco, I need to order some 9/16" wide window channels for non-tilt windows. The model #'s are 1620 ans 2230. I believe it's the 350 series, but would like you to confirm before I place an order. The bottom plastic part has a plastic slider on both sides and the top has no plastic slide ... (cont.)

Please inform which part number I should use from the photos. This is for a Milgard vinyl window. Note, it appears from your website this should be a Series 380 or 385 part. The only difference being the plastic pieces on one end have a different number (but are visually indistinguishable). Si ... (cont.)

I am having a hard time locating a replacement balancer for my window. I thought I found the correct one but when I weighed my sash it is 36.4 pounds and I couldn't find a balancer for that weight. Length 27" Width 9/16" Depth 9/16" Bottom plastic piece 17/16" depth 15/16" width top plastic piece 3/ ... (cont.)

Dear Sir or Madam: Photos of the original part I wish to replace are attached. The markings read: 25 4 DV CMC 7 The metal channel is 26-in long with hemmed edges, cross section dimensions are 5/8-in by 5-8 or 9/16-in depending on which side you measure. I can provide more detailed dimensio ... (cont.)

Could you help me identify this part: It has stamped on it: 26 4 FL Caldwell. It's about 27 inches long Thanks, David

"20 4 HS Caldwell" stamped on balance channel length 21"(metal-metal) channel width 1/2" (9/16")

Need to replace both channel balances on 34"w by 36"l Kinco windows. Unsure of actual length because bottom rusted away. Measures 34.5" into rusted area. Markings on side of balance say 34 2 K T CMC. Would this be a 34" or 35" Balance? Believe this is 350 series from your photos & .5" wide. It app ... (cont.)

Hello. I need to replace the channel balancers on a Milgard window and I am trying to figure out the part number. The old channel has 23 5 AS Caldwell printed on the side. It is 24 inches long (just the metal channel) and .5 inch channel width The sticker on the window has H-C40-54x90. It i ... (cont.)

I am looking for a shoe that fits a series 385 channel balance. my shoe messures 7/8" while your part# sizes are 15-004 1 3/32" and 15-005 1". Is there a shoe that will work for me or will i have to file the shoe down to size? Thanks Bill

Hi, The pix show a BSI 26" channel balance. I need one more just like that one. I also need parts to complete an assembly of another smaller (17") channel balance just like that one. We have the 17" metal spring but there isn't a shoe or top on it. And then I'll get some spare parts as well. ... (cont.)

Hi, We need to replace 6 balances in our manufactured home. The windows were made by Alpine. I have attached pictures of the parts. Dimensions are on the pictures. The back of the channel is 1/2" wide. The side of the channel is 9/16". Please let me know if you have replacement parts. We would ... (cont.)

Hello, one of my window channel balances recently broke (the tension string). How do I go about ordering the correct one? There are no markings other than the numbers and letters listed below: 28.5 GX CMC 11 The metal part is about 28.5 inches and the width is 1/2". Thank you

Hello, We have a messed up channel balance that is about 27 inches long. It has "26 4 CALDWELL EM" stamped on back side. Attached are several photographs that might assist in identifying a replacement. Windows in our home appear to have been made by Northwest Aluminum Products - there is a ... (cont.)

Hi! I have single hung windows (from MIlgard, I believe), and need to replace the balances. They are stamped "32 9 GV CMC 2". They are 33" long, and 9/16" wide. Can you tell me which part, with which ends I need to specify to replace them? Also, the windows are 12 years old. I've lived h ... (cont.)

Marking on it is 25 5 IO CALDWELL, if you need more let me know. Don C

Sir, At first I would ask if the 1st two images are sash guider, as I did not see any similar part in your web? The top and shoe are showed in other images. The stamp is "19 B", following "BS.I" which is in a vertical direction. Could you please identify the replace parts from you? Who is orig ... (cont.)