Viewing all customer Discussions for:

26-316 Interlocking Pivot Bar

Looking for a pivot pin for a bottom sash for a double hung window. Picture of sticker on window in the attached upload.

helps window move up and down without just falling

Could you please help with the parts I would need to order to replace the broken pivot assemblies. Also, if there are any instructions on how to replace the parts.Thank you,Gary

Greetings,I'm struggling to locate these (2) replacement parts - for the same tilt window: 1) pivot bars & 2) tilt latches. Currently, the only identifiers I see is a number "2" listed in a circle on my broken pivot bar, but please let me know what else I might share.Thank you in advance for you ... (cont.)

These are pics of a pivot bar that I need for an Alliance window. It looks like a pivot bar 26-316 but not sure. I also need 7 or 8 "shoes" for the windows. How do I know what part number they are? Windows are probably from 2003-2004. Bought the place in 2005. Thank you!

Holes are 1 1/2 inches 2 1/4 inches

Need to find replacement for my double pane Amerimax older vinyl windows. One looks like a pin, the other are springs

Is this enough in for you to identify the pivot bars I need?It's also possible I ordered some before, maybe under my e-mail address?Bill

Alliance SH window model Wingate CAR# 115-103. 2 per side, need 8 for left side and 8 for right

Coil and brakes replacement Thanks

Parts needed

The photo is the right side (looking from the inside) upper glass.l would like to purchase both left and right side bars.

Hi, Looking for a replacement part, I believe it's called a pivot bar, screws into window frame and then attaches for weight and balance on the side. Windgate/Belmont Single Hung Vinyl window. HR50 1118x1600 (44x63) Single Hung DP50 31 1/2 x 61 1/2 Approximately 1.75 inches depending upon where the ... (cont.)

Do you sell a L shaped pin like this one which is held by 2 small screws?

Coil balance series: S140 Sash-weight: 21lb window Coil-stamp: None Quantity: 2 Comments: Mine was a 2 piece coil spring & a separate shoe. I need the double coil. Year 2003 Alliance

I need a corner pivot bar for one of my windows. The track that the pivot bar sits in on the window frame is 5/16 of an inch. The actual pivot bar that inserts into the window track is also 5/16 of an inch. Please see the pictures. Any recommendations? Thank you for your help.

Hi, thanks in advance for the help. Both pivot bars have broke off. I've sent three photos with the little information I have. Please be in touch. Thanks again.

I need two sets (2 left and 2 right) of replacement balance shoes, And 2 replacement pivot pins. I believe these were manufactured by Alliance Window Systems approx 20 years ago. If you have replacement parts, I would like to purchase.

Have several broken pivot bars can you suggest replacement? Alliance window Belmont It looks like it measures about 2" from last screw to tip

The hammer head part broke... need to replace.... window is from homedepot