Viewing all customer Discussions for:

26-452 T Bar Pivot

I'm looking for these two parts, do you carry them?

I am looking for the part that clips into the balance on the window. It is a double hung American window the model says 5200/6200

Need help

Plz see image and advise

I am looking for this metal part can you help me find it

This is the piece that holds the window when tilted

slide lock metal round piece and fitted nail thing with two holes that hold the window to glide up and down there is a number on the nail piece unsure if that helps

Had the numbers 98 31 on one side

Need the white slide part and the metal "T" or insert that is screwed into the bottom of the sash. White slide looks to be about 1 1/4 " wide and about 1/2 " thick. Thank you!!! Jim

Good Morning. I was given your company name from a friend of mine that you might be able to help me out. I'm looking to see if the plastic part in my picture is something you might have in stock. I'm not sure of the model of the window but I do believe that is is a Superseal.ThanksRich ... (cont.)

it is 2.5 inches long with holes at about 1 3/8" and 1 7/8" 7/16 wide at t 5/16 overall width

Pics 1,3 and 4 are the pivots for a tilt in sash Pic 2 is a screen latch.

Stud that goes into the pivot for the window tilt

They are 3" long, from the wide tip the first hole is 1.425" and the second hole is 2.425" away.

will be helpful if you can find this pivot bar

There is no manufacturers info that I can find interesting he window frame or windows. I just moved in and discovered that the pivot bars are broken. They are all vinyl, inside and out. I don't see a match on the site, but if you have ideas of what would work, I would like to be able to lift and low ... (cont.)

Hello, I am looking for two pivot that broke in half. They fit in a Simonton Profinish Brickmould 600 Vinyl Double Hung Window. Any help would be greatly appreciated. Thank you

MOUNTS INTO Product Code: 15-129 PICTURE 2555 FITS INTO THE BOTTOM OF THE WINDOW KEEPS THE PIVOT BAR FROM ROTATING.

Can I buy the whole ass'y for the balance ? If not what about the pivot lock shoe? Also do you have a match for the pivot bar ?

I have a Lockheed window with broken pivot bars. Attached are pictures of the 3 1/8 inch bar.please reply with a positive replacement.ThanksTony S