Viewing all customer Discussions for:

26-454 Pivot Bar, 2-1/2"

I think they are Great Lakes - Plygem double-hung parts

Any suggestions for this replacement part?

Hello, I need replacement parts for 3 Anlin windows. I have attempted to attach JPG pictures but it looks like that may not have worked. The parts nI need are; 4 Coil Balance -14, 2 coil balance 16, along balance supports, pivot shoes and 3" pivots for each of those.I can send the pictures directly ... (cont.)

I need the 4 pivot bars in the picture above. 2-1/2 inches long 3/8 wide. l shape. first hole is 3/4 second hole is 1 7/8 from end cannot find one on website

This pivot bar has threaded holes. I need to identify the part number please

The left coil balance has an 8L marking and the patent number 6,378,169. The right coil balance an 8R marking and the same patent number. The pivot shoe has a U shaped opening the bar and attaches to the coil on the inside.

Need 6 of the coil balances, need help finding out the part number. Also one of the bottom metal screw on pins. Also the tool that opens the track to get the coil balance in.

I have Sunrise double hung wood windows (double paned) and I need 6 pairs of the lower pivot bars. I saw some similar replacements but nothing identical on my Google search. Thanks!

Looking for these window pivot bars. 275 is stamped on one side, C is stamped on the other side. 3" in length, 3/16" thick.

I need this two parts

I need a balance assembly for my double hung window serial number 113-716538. It is a double coil assembly 3.5 inches long, 1.25 inches wide and 0.5 inches deep.

The balance assembly in the window is broken at the bottom piece that sits under the coil in the track. Also, the rod that extends out from the bottom of the window is broken.

This piece is broken that fits on bottom of my window that fits into channel balance shoe

I purchased 2 of the window balances and one buckled to breaking when my handyman was stretching the cord down. The other on a different window installed fine and works very well now. He doesn't know when the little piece broke off. He assumes from the first image. Please advise. My worker wanted ... (cont.)

I don't know the manufacturer, but very likely Canadian, as my home is a modular home, built by Royal Homes in Wingham, Ontario. No markings or numbers of any kind on the part. The home is only 17-years old, but several of these have either broken or have been pried out from the windows -- mostly ... (cont.)

Looking for a suitable replacement for the pivot lock shoe or the entire balance spring/pivot shoe unit as well as matching pivot bars for a Sears (Accu-Weld) window manufactured circa 2002. Pivot Shoe is 9/16" thick, 1 1/4" wide, and 1 1/2" tall T-bar pivot is 5/16" wide, 13/16" thick and is 1 3/ ... (cont.)

This is from a window labeled "Homeview." After breaking, the window will not stay open. Can you help? Thanks!

This part is aluminum. Measurements are in photos. It has the number "8" on it.

Replacement pivot bar for window. Please see attached photo and let me know if you have this. Thanks

Hi, just double checking that I am picking the correct parts? I think I need two s140 12lb balancers. The one in the pictures measures thickness of 9/16", width 1 5/16" and length with shoe is 4 9/16". Also wondering if my pivot bar is going to fit into the s140 shoe? This is a single hung tilt wind ... (cont.)