Viewing all customer Discussions for:

36-004-10 10" Stainless Steel 2 Bar Hinge Set

Wright replacement cranks needed right and left, old ones rusted not working . Cranks and operator needed. Not sure about correct one to order.

One photos the bottom where the operator goes but I don't know what it needs. The other photo is the top of the same window. Thank you!

Does the 36-004-10 have an adjustable nut? Thanks!

Aloha! My windows are only about 10 years old but the humidity has missed the mechanisms. The crank is ok, the hinge is ok but what appears to be rusting out is the mechanism that connects the crank to the hinge. I watched your video on how to take it apart, but there doesn't seem to be an obvious ... (cont.)

Can I replace the bearing wheel instead of the entire single arm operator assembly? If so, questions: Is the pin threaded? What exactly would the replacement part be called? Do you stock these parts?

I need a hinge to replace a rust and broken one on a casement window but do not know where I can buy the replacement part. I removed the broken hinge as you can see from one of the photos. The other two photos are to show the hinge on the other side of the casement window.

Truth brand markings on existing hardware: 30751/30752, 30746, 30462

We have older Pella windows 1976 vintage. The opening mechanism has two rollers at the bottom which should allow the window to be cranked open. The rollers must have worn to the amount that they no longer hold the support shoe to remain clear of the window frame. The support shoe drags on the wind ... (cont.)

I have two casement windows, one opens left and one opens right. The bottom window hinges are severely rusted and no longer function correctly, however the top hinges look and seem to work fine. The 36-004-10 looks like it will work as a replacement. If I buy one set can I use them to replace the bo ... (cont.)

Hi I live across from ocean in maui and my casement window hinges have all eroded and the windows are hanging. Also the plastic parts are all brittle and broken on the locking slide part. Do you have these parts?

can you please help me with these also, left and right, thanks

I have a window crank that works fine once the window is partly open, but is not able to close to lock or open once unlocked. From the inside window cranks from left and swings open on the right. How do you measure the length of the crank?

Will your casement window parts work on wall side replacement windows and if so which ones would you recommend the hinge bracket broke away from the operator. I have 2 of these windows and both are bad Thank you for your time Dan

37.41.00.100 33 SST Heavy Duty 10"

I'm looking for these plastic covers to cover the casement operator. They don't snap in, but have double backed tape to hold in place and come in right and left hand versions. The crank handle is a truth handle with us pat 361490 5560082 stamped in it. I've found the handle on your site but not ... (cont.)

I'm look for a similar operator That o can use it to replace the broken one

Entry gard Truth The part I would like to replace is the bottom rusted bar that is attached to a track under the window sash. The bar is 5 inches and the track under the window sash is 7 inches. Thanks!

I need the little black clip in the photo. It broke recently on a 10 inch track and now the upper part of the window sags down, ready to fall out if it weren?t held by the arm. Plmk what these parts are knows as, and if you carry them. Thank You

Hi, I am looking for 2 pieces of Truth hardware numbers 30985 and 30986. Would you be able to help me with that?So? 36-004-10 matches pretty well but the angle arm that crosses down to support does not look long enough. The one I need measures 8" what are your thoughts? Thank you, ... (cont.)

Looking for this hinge for my NAMI NFRC 100 casement window