Viewing all customer Discussions for:

39-438B Encore Dual Arm Operator, Sill Mount, Low Profile

I saw TRUTH 30744 as part of the hardware but there is no marking on this operator

Need right and left side. Part has truth on it

I need the track that this end of my operator(39?438b) will fit into.

These windows are near the ocean in Hawaii. The hardware is rusted and in one location it's turn the plate under the crank into a powder. Any replacement hardware would need to be stainless. When looking at the photos, the photo of the casement hardware shows the weathering of the plate I menti ... (cont.)

This crank assembly is from a Hurd Window. Hurd is no longer in business. This window was installed in 2000.

Hello, I'm trying to match these with the inventory on your website. They are Truth hardware parts and I need top and bottom sets. The part numbers listed on these pieces are 31858 & 40986. We need right and left-handed. Thank you for any help you can give.

I have a Truth 41012 that I need a left and right side replacement for on a casement window. The larger arm is 10 3/4. What part should I replace these with.

I am looking to order truth Maxim left hand dual arm casement operator in white but also need to replace the window slider that's in the photos provided. The model# of the operator is stamped 31876 on the operator. There are no markings on the slider.

Will the "truth folding handle with cover" 39-375 and 39-376 fit my Alpine Series 80 casement windows? I don't need the cover, only the handles. Thanks, Sarah

I wanted to get this bottom part of the window. I attached 4 pictures. The first 3 are from a different window showing the piece we need and the last one is the window with the missing piece. The window is 14.5 wide

Need to replace basically all of the metal components of this window. 8A0442HGSS was the replacement part number Milguard gave me for the hinge. HA6702SK or HA0013SK for the striker plate Would also be good to replace the crank handle assembly if available

Attached are images of crank that i need to replace. (stamped with "Truth") As you'll see the gears get worn due to the 2 interconnecting gears move up and down when cranking and get misaligned. Soooo... I need to put in new cranks. Hopefully what you have will work better than these originals, ... (cont.)

Could you please identify the three Truth cranks in these pictures and advise as to what truth hardware replaces them. Thank you!John

As you can see in the photo, the the first teeth on the gear are pretty worn making the window difficult to operate. It has gotten stripped over time because the crank operates in the opposite direction that most feel it should. Any chance you can help me order a replacement? I live on an island wi ... (cont.)

I would like to replace my Milgard casement window handle with a folding type handle, perhaps the Truth folding handle 39-375. Attached are photos of the operator which was recently replaced. Will this, or another product work? Thanks, Steve

Hi There I need windows crank for both right and left handed. Please see included photos.

Need to replace. Teeth on sprocket are worn

I have all casement windows . Needing entire top and bottom hardware. How does one tell if it is right or left? Below are some photos. My house was built in 2007.

I need to replace all the hardware on several casement windows in my home and i need help identifying the parts i should order.Can you please help me identify which parts i should order based on these photos?If you look at my order history, you can see the parts i already ordered so im hoping you ca ... (cont.)

I am looking for a window crank replacement part. I can't read the part number but I believe it is either 071299 or 071289. I can't find any other numbers. the second picture, the clips to hold my bottom windows in place when raising up or down are broken. I tried to capture the sticker that w ... (cont.)