Viewing all customer Discussions for:

39-438B Encore Dual Arm Operator, Sill Mount, Low Profile

I hope my photos will help you identify the correct replacement operator.

Arms, runners, all parts

My hand crank opens the window, but unable to close the window. Replace the hand crank only, but that did not work

Labeled "TRUTH" back of crank assembly just has a manufacture date (?) 03/19/19 05:25 B and there is a letter D on the hinged arm. I found a nearly identical part online, but it didn't have the black plastic slide at the end of the long arm. This slide appears to be permanently attached with a non- ... (cont.)

I need 5 left hand cranks I I need 4 right hand cranks for Heard windows. sissor long post 9" short post 7"

Two cranks like this one shown in the picture need replacement. I have highlighted the one 'arm' has the number <32010> stamped on it and circled in the picture. This number is stamped on all of the cranks. Can you identify and provide replacement cranks for two windows? One crank is on the ... (cont.)

Hi, I need to replace the crank and catch on these windows to make them bronze. It says Truth on the hardware and i think they are hurd windows.

We need replacement parts for these Farley vinyl windows. Attached are what I was provided to send.

Hello. We just purchased a home with Hurd windows. We have several operators that no longer work. I have been searching for replacement parts, but have been unable to find / understand if a replacement parts will work. I do have pictures of the current hardware that I can share. I would like to ... (cont.)

I am in need of both the left hand and right hand window operators. I believe they are your part numbers 39-438B and 39-439B. Can you confirm. My measurements match your measurements included in your images of 39-438B and 39-439B. I have a round hole at the end of one of the arms. I can't tell ... (cont.)

These locking mechs and rolling armatures need replacing. Trying to identify correctly. Pretty sure it's a Swisco window.

hi I found a number on the arm ,it is 318-58 I couldnt getthe mechanism out from the window The Mechanism is a right handed for the right side of the window

Hello, I am looking to replace three total cranks. I am unsure of the brand but I believe it to be Pella as a smaller window in the bathroom of my home does have a model and serial number on it. this window opens right and the other two open left. thank you!

I have a window that the ges inside are striped and I need to replace .The window it self is 5' 0" wide by 65-5/8 " tall and it has two sashes .I looked all over for numbers but couldnt find any the only thing I found was on the side latch it says Truth 31401

Need help with part number for the 2 pictures below. 2 different size window

Both my window cranks (left side shown) have wearing on the gears and cannot open close well.

I am in need of the external crank components for my Jeld-wen casement windows. I have multiple windows. They are all custom sized (four 35"w x 49"h; two 31" x 49"h; two 26"w x 47"h; two 34.25"w x 46.5"h) the parts needed are pictured as they are all starting to rust. And two windows are not operati ... (cont.)

Please confirm that I would use your product code 39-253RB and 39-253LB to replace my Hurd operators.

Need help removing the case

I need to replace the casement window crank mechanism because the gears are lifting out of alignment when closing