Viewing all customer Discussions for:

33-067 3/8" Shoulder Screw, 5/16"-18 Thread

Can you help me identify the parts in the enclosed attachment? I will,need 3 of them and also need to return some incorrect parts I already ordered and received. Thank you. Chris N

Can you please help me identify a replacement for this part ?

I am replacing a LH Type II operator on a Pan Am window. Please see picture where the hole-to-hole arm length is 2 3/4

Hello, I recently bought a 39-074 : Lenahan Window Crank. How does the arm of the crank fasten to the awning. I bought 33-067 and 33-207 but I don't know how they go together or what the threads on the 3/8 shoulder screw screw into. The arm on my awning just has a hole. The same as the hole in ... (cont.)

I need 2 that goes to a window in a bedroom.

I need to get two of the left side window cranks that are pictured. I see several on your site and not sure which one to order. I also need two of the screws pictured if you stock them. Please send part numbers if you can identify them.

Hi, I recently received a panam/Daryl window crank 39/017 there is very little difference between the old crank and the new crank, except for where it attaches, the screw and the rivet. What hardware do I need? Thanks and have a great day! Lynn C

I need the shoulder screws: counter sunk ,fine thread, phillips head with shoulder that is used to hold the bar in place that open and closes the window locks at the same time. lost one so need order replacements

I need to find the clear plastic connectors (bushings?)to be able to connect the crank with the window levers. If it matters the crank is 4 1/2".

The housing part of this is 4 7/16" vertically and 2" horizontally and 3/4" thick The mounting screws at the top are10/16" apart from center to center The mounting screws at the bottom are 1 1/2 " apart Below are pictures of it from many angles including one where it was still mounted on the ... (cont.)

Do screws come with the cranks or do I have to order those separately?

I wrote on your youtube for awning window winder and your website here asking for help and sending you pictures since not hearing from you bought Barton Kramer at Ace it fits as a replacement for the damaged stripped unit i had in my 1969 Condo in Miami Beach but never heard back from you since your ... (cont.)

The part only had Daryl Miami fla the building was built in 1974. Thanks for any help you can offer.

The two photos show original (silver) and replacement (beige plastic) hardware for this window type. Replacements were made by others. I cannot find any markings on the hardware except some circles. The size is 4-1/2" x 2-1/8" plus the flanges. There are four sashes per window. Some of the existing ... (cont.)

This is on a window in the bathroom. It is a very old house. I could not identify the logo, possibly "ACP". The window only has 2 horizontal panes that rotate. I have had trouble verifying the dimensions when comparing online diagrams.

These are to windows that were built in the late 50s. The frames are aluminum and have horizontal glass panels. There is a handle that attaches and you turn to open. The dimensions are from screw hole at bottom to screw hole at top = 5 1/4". Bar that attaches to window pane, that comes out of the h ... (cont.)

Do you have these or any idea where I might get one of these? The arm is 1-3/4

Hello I am looking to replace the cranks on about 10 jalousie windows please let me know if the pictures I sent are enough to identify them Thank You Greg

trying to find window crank replacement as the ones on windows no longer work. there is no name or numbers on this part. 5 and 3/4inches from top to botton. 7/8 inch wide at top with 2 screw opening. 1 5/8 bottom with 2 screws Thank you Linwood

link is 2 1/2 in. lower mounting holes are at 1 5/16 in. upper holes are at 7/16 in.