Viewing all customer Discussions for:

33-070 5/16" Shoulder Screw, 1/4"-20 Thread

I'm in need of 13 replacement cranks for my florida windows. The house was built in 1968(?). There are no visible markings on the windows. Hardware is 6" long with screw holes on the left.

Hi Swisco, Here are photos of what I am looking to replace/repair. Product 39-194 is close; all measurements correspond EXCEPT for the 3/8" hole (mine is 3/16). And as I mentioned- when all folded in, on mine the arms fill the casing. Thanks for your help!

Greetings We have just purchased an older home on Miami Shores, Florida, that we want to keep as original as possible. The house is filled with jalousie windows which seem to be all of the same make. See rhe attached photos. The most common problems are the missing machine screw with thw shou ... (cont.)

I need to replace multiple pieces of this hardware. I cannot find any markings on it. The body of the piece itself is 4.5" x 2.125", not including the mounting screws. The window is a multiple lite awning window. The tan colored hardware is a replacement for pieces that were already broken before ... (cont.)

I wrote on your youtube for awning window winder and your website here asking for help and sending you pictures since not hearing from you bought Barton Kramer at Ace it fits as a replacement for the damaged stripped unit i had in my 1969 Condo in Miami Beach but never heard back from you since your ... (cont.)

The two photos show original (silver) and replacement (beige plastic) hardware for this window type. Replacements were made by others. I cannot find any markings on the hardware except some circles. The size is 4-1/2" x 2-1/8" plus the flanges. There are four sashes per window. Some of the existing ... (cont.)

I can't find any name/number/marks on this assembly to identify it, I'm hoping you can help me replace this because the retainer threads have been stripped out. Measurements: 5-1/4" top to bottom (all measurements approx. hole center to hole center) 1-1/8" between the bottom two screw holes 2" ... (cont.)

I am looking for replacement jalousie window operators for my parents' sunroom. The windows are approximately 20 years old. The original operators are brown (or bronze) in appearance. One of the operators has the following information cast into the parts: On crank 11500-11 PAT PEND Inside stat ... (cont.)

I have these old jalousie windows in a house under renovation build in 1950 (according to scarce records). It contains three types of windows 1) There are 6 36x50 windows each with 3 panes that are 32x14. 2) A bathroom windows with 1 pane. The window is 25x25.5 3) 1 kitchen window 36x25.5 with ... (cont.)

ref: awning closure 39-025. I recieved parts as ordered...installed one works well...second one i attempted, awning window doesnt close all the way. I did lose a bushing that goes in crank hole...and you sent no screws or bushing. could the lack of the bushing prevent closing if so, how do i obtain ... (cont.)

the small arm that attaches to the window has the number 76 on it. 5 1/8" from top hole to bottom hole. 1 1/8" 2 bottom holes. thread is 1/4". small rm length is 2.5"

Screw that joins the operator with the window

I have several broken spacers with the following: 520.000.07.00.50 Made in Austria. I ordered replacement spacer from Swisco part number 32-339 now I need the screws that will work. Old spacer only used 1 screw this one requires 3. Thanks

Need help getting the correct crank replacement for my aluminum awning style casement window. The home was built in 1948. I'm not sure if the window is original. I can't find any markings or names on the crank or the window.

The 39-350 I ordered (lower unit in pictures) does not have a screw and bushing to attach the control arm to the window control arm. See my old unit which is the upper unit in the attached pictures. My pen is pointing to the bushing and screw needed. Can you provide me with a part number to obtai ... (cont.)

I need this screw for windows in one of our High Schools. Thanks Steve W.

The photo is of the part i need for awning window operator. Do you have the two screws that are shown in the picture? Appreciate your help.

We have four 30inch screen sliders and three 36inch screen sliders, we need new corners with wheels and springs for all, top and bottom.

Do the screws for changing the cranks come with the 39-012 operator. What tool is used to screw in/out the pan head screws in the arm extension piece?