Viewing all customer Discussions for:

39-013 Casement Window Operator, 13-1/2" Arm

Hi Swisco, I have a right side crank operator arm that is jumping loose and skipping out that only opens the window a couple of inches. There is no branding or numbers marked anywhere that I can see. I did include a photo of the left side operator that is properly functioning. It is a brown Pine Cr ... (cont.)

Need new window opening part

50 year old mechanism for window looking to replace Prefer white

Hi, I have a left casement window and right casement window. On the left side (facing from indoors), the nylon bushings has fallen off which makes the arm not able to stay on the track to open and close the window. On the right side, the crank does not fully close the window. It goes part of the ... (cont.)

I'm looking for a caesment window opertaor with 13-1/2" arm to replace Truth operators for Norco window. The window is casment and it opens to the right side .

Circa 1988 window casement operator. No idea how to spec replacement. Please assist.

Need parts for this window.

Need 2 left hand and 2 right hand Also need the tracks on the windows

The crank gear mechanism I need is from the Crestline casement windows that were in stalled in my house about 43 years ago. The overall length of the arm and gears is about 12 inches. Reverse side TRUTH P/N is LH45135

I need this part both right and left. The partatrached to the window measured just over 11 1/4 "

I'm in need of 6 Trinity single armOperators; 3 left & 3 rightThe arm appears to be 14.5" Please let me know price & availability Thanks Anthony

Handle is marked Craftline. ID number on bottom 40055, logo of T in a trapezoid. Home built in 1979.

Looking for replacement for this. Has 358-1R stamped on it.

Truth is marked on the bars, but I could not identify the model number. Hopefully the photos including measurement will help you with identification.

Hello, Can you please help me identify which operator I need? I do not have any information about the existing hardware. Thank you

The teeth on the arm and the gears on the crank mechanism slip so that I cannot close the window without manually pulling it in to lock mechanism. Arm length is 14 inches long. Housing length where screws are inserted is 4 3/4 inches. Width of unit is 3 3/4 inches.

Hi, I have 18 windows and would like help matching the part I need to replace.

Looking to replace the dozen or so casement window operators, the color should be a light brown similar to the color of Cedar. The Arm is 13 1/2 inches long. It came from a casement window manufactured by supervision and was manufactured by Truth.

I'm looking to replace these operators. They seem to be about 12.5 inches from the rotating disk at the end until the bend in the arm. These are two separate operators. Both say Truth on them. Do you know what parts they would be?

Extension arm - 358-2 Windows were installed in 1977