Viewing all customer Discussions for:

39-013 Casement Window Operator, 13-1/2" Arm

Truth 45251

I need to replace cracked and missing operator arms and cranks for a set of windows in a 1979 split level house. I found Rimco part # 40056, and need both left and right arms, cranks, etc. The operator arms have a curve in them so am not sure what to measure for length? Thank you for your help! ... (cont.)

trying to figure out what parts I need to order for these three different window operators that do not function

Looking for 13 1/2"window crank replacement

Replacement for crank out windowOn the back it appears to be made by TRUTH there is a part number above the truth logo 40055 there's a number six in the corner and I each in the other corner these are on the back of the unit that I took a picture

Hello, I am trying to find a replacement part for an older model of casement window. We order parts from a different distributer per their recommendations and they do not fit. I am hoping someone from your team can be of better assistance. The first picture is the original that is broken. Other pi ... (cont.)

I'm looking for some help identifying what model window crank and arm I need. Any help would be appreciated. My name is Gary. Thank you

The previous owner of my home installed HURD casement windows in 1988. I have 2 window cranks that are worn out and have the part name WRIGHT 07701-00. I would like to get these replaced, 1 is right side crank and the other is left. I am looking at the the following 39-013 39-014 39-114L Am I look ... (cont.)

These are the operators for side opening windows They are attached to Windsor Wood Windows Truth 40055 is marked LH and I need 4 of these Truth 40056 is marked RF and I need 2 of these

Trying to repair or replace Andersen window cranks and need part number. Any help is appreciated! Our house was built in the 60s. Not sure if they are original but they are no older than that.

I need to buy two complete sets of casement window hardware. a right and left opening. 13 " arm. Probably from an older caradco type casement window . Can you help me. Thanks, Wayne

Our house was built in 1974. I believe these to be original windows. There is no marking on the class for a company brand. The crank handles say LTBEST. The back of the crank says P-234-DC. Some of the cranks don't open at all. Some are missing the part that the handle attaches. Some do open but it' ... (cont.)

Hello, just trying to identify a replacement part or a substitute for this part. The arm is about 15.5" long. Can't find replacement. It is champagne/aluminum finish. Any help to identify the part and where i could order it would be appreciated. Thanks

I have 4 windows....need four left and 4right (side frame) lock (8 total) and 2 right and2 left for (bottom frame) sill crank (4 total) (at least I think that's what they're called...)ThanksLinda

The post that you slide the lock over is rusted off. Can it be replaced separately? If not what is the correct part number to replace the whole mechanism?

I need a few of these. And I need some missing handles. Bronze maybe oiled bronze color Thanks RickI also need some for another type of window see photos

Need hardware for m & w casement window

You guys have the exact part I need but it's too short. You have a Caradco window crank - Product Code 39-028. It has the screw holes in the correct place and everything but it's too short. Can you help me find the exact part with a longer straight arm? Or can you help me identify the manufacturer ... (cont.)

Looking to replace cranks on approx 5 feet tall 20 inch wide casement windows. Long arm measures 12in to the bend. Thanks

I need two of these, one for a left crank and one for a right crank.