Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

Entire crank unit needs replacing. Two or tree turns before engaging and slips when trying to complete closure, so closing is not possible using only crank

Hello, I am looking for three crank replacements for these casement windows The faulty cranks are from Norco and were installed in 2000. The image on the far right is one that has been recently replaced...but I do not know the manufacturer or part number.

Need 3 replacents

Wright casement window circa 1989 with the numbers 8788 on the arm. Need arm and related parts

Window crank on arm it says truth on base of crank is 45034. It looks like from end of arm to shoulder top it measures about 8 inches. Any help would be greatly appreciated

I am looking to replace two (one right, one left) Truth window operators. The bar is a single fixed with a bar length of 13 7/8" measuring from the tip of the bar to the center of the gear. My unit fixes with 4 screw holes in the rear of the unit. The second part is attached to the sash and it's ha ... (cont.)

I am looking to replace the cranks on a weathershield casement window. It has a left and a right side. The numbers I found on it were 3581R and 3581L.

It says R.O.W. on the side. It's very old but maybe you have a part that would work. It's for the left window if you are in the house looking at the window and the window opens to the left. Thank you!

I need the crank of the picture of the closed window the open window is the same size window but they have a Identifying marks on it that may help you find the part that I need

Only marking I see is the Row on the handle of the crank.

Made by 5 Truth and has LH 45135 on the bottom - The arm is 13.5" from the center of the pivot to the tip of the arm.

I took pictures of intact left window and the right window with bar missing. I need the 11 5/8 inch long bar

Is it possible to only replace bottom hinge? The window does not crank back in to close. Part #30744 Truth

Looking for a replacement window opener. It has Truth stamped into the arm. It is a right hand window operator with a straight arm. The arm is 12 inches long from the tip to the bend or 13 something if the bend is included.

Window crank gears worn out Also top and bottom guides of one is missing the nylon slide.

I have several windows missing the blade and roller to open the window. Are there parts that you sell to replace/repair so I can keep my windows . I need right and left mechanisms to operate windows Original window is a Row window

I have several Weather Shield Casement windows installed in 1981 that require new operators. I have attached images of a 13.5 RH operator and the handle that was with it. The operator has 40056 RH code and arm 45199I I was given your website by Weather Shield as a possible source of a replace. I ... (cont.)

Pictures are for the right hand side. Need to replace the left hand side window crank. Thanks

The hardware brand is Wright and I'm wanting to replace the hardware that allows the window to open. Inside the window pane has the marking QG-1 ASTM E 774 Class

Marked on the bottom LH 45135 The arm is marked 40051B