Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

I have this number on my cranks - Made by TRUTH 45136 So far the only thing I have found here is the 39-255. I also need the 13.5 arm. The other one that was reference didn't have the same screw holes. Thank you

The casement window pictured here and used in this house was built in 1957. I am pretty sure that the windows are Biltwell from Dubuque, Iowa. At least the hardware has that as a stamp identifying the hardware as such. The arm is over 14" in length.

Hi, I have a window crank that needs to be replaced.could you help id'ing and quoting it if possible. Thank you tyler

I'd like to get two of these operators and the corresponding handles. Thank you.

I do not see any identifying names on this mechanism. I am on the ocean and keep windows open all the time, so salt air and exposure make for rusted mechanisms. I have contractor friends and also a handyman who can do the work. Please let me know if you need more detailed photos. Thanks for your ... (cont.)

I'm looking for a replacement for a Truth 40055 operator. It is 13.5 inches from pivot point to nylon wheel. I can't find the exact part can you suggest an alternative?

Please see attached photos. I am looking for window cranks for crank-out windows. Need a number of them. Probably would also like to buy related hardware to completely rebuild window mechanisms.

I am looking for cranks that are similar to your item 39-028, but with an arm length of 11" instead of the 9 1/2". If you can locate, I will need both a left and right in the Dark Bronze color. The 11" is measured from the same point as in your picture. Question: if you do not have an 11", would ... (cont.)

I am pretty positive I need 2 -(left and right)Truth window casement operator parts #39-027E. Here's what I need to know before I order. On YOUR measurement for the single arm in a part photo, you have 9 1/2 inch arm. In YOUR measurement drawing in one of the actual photos, it says 9 1/2 inch arm f ... (cont.)

I have a right hand window with a Wright and Truth engravings on it. The part mounted to the window is 13-3/4 inches long and says push down to remove. What do I have here? Are these companies in business. Do you have a replacement unit in the color that is shown? Looks like a bronze color. ... (cont.)

Hello, I need to replace the operators on a few old Possi casement windows. I have attached a picture of one for comparison. The only part number on it is 07702-00. In one of your previous postings you recommend a 39-014 and 39-013. Would your part number 39-028 be an exact replacement? Also, the ... (cont.)

Hi - looking for this ROW lh casement window operator. can you help me out?

I am at a loss for this window hardware. My parent's house was build by a contractor that used "industrial" parts that are so irregular that it is often hard to find parts. It was build in the 60's. This being a prime example of tough finds. I am looking for any help...hope you're up for a chall ... (cont.)

Sash Controls, Inc., Det. 14 Mich., Pat. No. 3.085.299

We moved into this house (built in '78 +-) and 12 casement windows all do not operate. Seems the controllers are broken. Attached are three photos - 2 of the controller, and 1 of the window. Any help is appreciated! Dave

casement window actuator arm length 11.5 inches

Need a couple replacement arm operators. Only numbers I can find are 358-2. Thanks.

I've a worn-out "R.O.W." left-handed operator, arm is 13 1/2 inches long, screw holes in crank are 4 1/2 inches apart. My window repair man could not find a replacement, so he gave the used part back to me.

it is right hand. I have a part # of 45136 on the base, a # of 40052 on what I would call the arm. the mechanism is stripped. I may also need a left hand. can I get new ones?

I have a trust 40056 RH and need to replace. Norm