Viewing all customer Discussions for:

39-031 EntryGard Dual Arm Operator

i need one for the left and right side of the window

Hi there. I need to replace 4 of these window openers - help! The markings on them say: Truth (brand) "Entry Gard" 205544

can you tell me what i need?

The short arm attached to the gear has the letter R stamped on the top side and the number 31538A and the letter L stamped on the bottom side The short arm is 3.25 inches center pin to center pin The pivot arm that is attached to the short arm is stamped 20810 The pivot arm is 3 15/16 c to c The l ... (cont.)

I need replacement hardware for my window. Was able to see the words, Entry Gard Truth and the numbers L30841 and 20810. Please see attached photos.

this mechanism is over 25 years old. It's been working just fine for the last three years since we moved in but just failed. I need to repair or replace it. Can you help?

Hello, The worm gear that turns the cogs to open/close the window has become dislodged from its base. I see that there are matching grooves on the side of the worm gear housing and the internal aspect of the base. Can these two parts be put back together again by applying force to the worm gear t ... (cont.)

I have a casement window that needs the dual arm operator replaced (truth entryguard 30744). The window swings out and to the left + has the crank in the center (not the type that folds down). Can you tell me the correct replacement part?

Hello- We have truth window hardware (we think from the 1980s) and the small part that goes into the crank handle appears to be damaged so is no longer catching the gear properly to crank the window open. Is this a smaller part we can replace or do we need to replace the entire operator system? If ... (cont.)

I have two windows that are missing the stem, the cover, and the handle. I read a post from someone to Swisco that I may need to replace the EntryGard Dual Arm Operator, 39-031 and 39-032. I looked at it online and it shows that the long arm is 10 3/4" but mine is only approximately 9 1/2". The shor ... (cont.)

I need replacement crestline casement window operators. I've bought some from this site before but cannot find the exact matches now. I need both left and right operators. The windows are around 30 years old.

Any idea what this is and do you carry window crank. I have bought from you all befor

Need to replace rusted out mounting to crank arm?

I have a list of operators and Cranks that need replacement. What number do you need off them in order to identify them?I need to order them ASAP. Please advise... Raymond

Some part #s on the Truth entry guard- 30842R; 20810 and 30744. Need left an right for 22" windows.

Track #30752A. Arm # R30842. Crank does not close window anymore. Just backs itself out of assembly.

We are looking for this crank, but have been unable to find something similar.

Can you identify these specific parts? I need one for the left window, and one for the right window. Thanks.

I just bought a number of the biege 14 1/2" tracks, and they are not going to work. This is a simpler track, with a cutout in the bottom to allow the operator "wheel" to snap in place. Four #7 screw holes, and not much else to distinguish it. I need a dozen or so. Thanks!

I am looking to replace 3 window arm operators. Please let me know if you have them, and how much each will cost. The info. on the arms reads as follows: R30842 - This one opens the window to the left I need one. 51538A - This one opens it to the right - I need two.