Viewing all customer Discussions for:

39-031 EntryGard Dual Arm Operator

Hi,Our home was built in 1994, we have a few of these window cranks that seem to be stripped. They will crank the window open but they won't crank it closed, it's as if the crank is stripped when you try to close the window. We had a local window company take a look at this hardware and they think ... (cont.)

The shaft pulls right out and prevents window from closing.

seems like the screw drive may have broken and needs to be replaced

Hi. Our house was built in the mid 1960's. The windows were replaced with Marvin Windows some time in the early 1980's. Many of our casement windows need new arms. I have attached a picture of a couple of the arms I removed from windows. They are marked Entry Guard Truth. The Left arm (with ... (cont.)

Looking to find a replacement for a window crank that goes on the right hand side of the window. The identifying numbers on the crank that was removed are EntryguardL30841 and 20810I have attached pictures of the part removed from the customer's window

I need to replace a Truth Entry Guard window part. Here are some of the part numbers: Base plate: 40471 Long straight arm: 30472rh Short curved arm: two pieces: R30842, and 20810 Do you have this part?

Hello, I am looking for a replacement part (R - 30842) for my kitchen window. The arm in the photo attached above has the number 20810. The hinge has tag #3. Can you please assist? Thank you, Walter

I need the gear on the handle and im sure the clips that hold it down. The handle and set screw is fine, so are the gears on the window crank itself, its just the corkscrew that has the broken corkscrew gear, its just broke off at the very end. I numbers on the window arms say entry guard 94C094, t ... (cont.)

I need window crank mechanisms both right and left for an old window. I am so lost with this quest my dear husband has put me in charge of. Your company can be my heroes if you can figure this out. I have included pictures of one of the cranks. I don't know if this is a right or a left since he only ... (cont.)

Looking for a similar part for great Lakes window crank replacement. See photos. Thank you.Rick

Please help me order the right replacement parts for this windows, left and right side. The sprockets are stripped. Also would like to replace the handle with a foldiing cover and handle. Thanks.

Hi, We have a casement window with the K K logo on the crank cover. with your help we are looking to replace 1.The crank system (slipping) a 2.The handle the supposed to lock the window is broken Thank you for the help Benny

Do you guys have anything like this? Or anything that can work for what I have.

Please help me order the right replacement parts for this windows, left and right side. The sprockets are stripped. Also would like to replace the handle with a foldiing cover and handle. Thanks.

I have a casement window that will not close all the way. How can I repair it? What needs to be replaced? Thank you!

Hi, I looking for a few of these Crestline window crank. I hope you can help. Thanks!

L 31538 and 40753 are the numbers stamped on the metal parts of the operator arms. It looks similar to what others have posted here..

Hi Guys, do you recognize this operator? Window did not have a name. Don't have any dimensions. Hopefully the unusual shape cover gives you a clue. Appreciate any help.

the gears to open the window do not work. Plastic casing over the gear and crank is Caradco.

I am looking for a casement operator and have included two photos. There appears to be a part number on the back: C-1081-101 with a number 2 in the lower right corner. I also need a replacement handle and have included a picture. The handle swivels to nest into a plastic holder that also covers ... (cont.)