Viewing all customer Discussions for:

Door & Window

Good afternoon, I'm looking to replace all the roller assemblies on my old "Arcadia" brand sliding glass patio doors from the 1970's. Need a total of (4) roller assemblies. Thank you, Tom

8009 R on the broken handle

Need 4, and what this attaches to at bottom

Hi, This is from a Milgard window. Only the bottom window opens. No tilt. 33" measuring only the metal bar. The side near the pulley has broken so a piece is missing. The following was printed on the bar. "32 4 HN CALDWELL"

Metal section is 21" long, 9/16" wide and 5/8" in depth. The number on part is 2040 CA / B.S.I. In need of 2 (1 pr) Thank you

The little sliding plastic piece is broken and the window almost falls out of the opening when opened. Need a new top assembly.

These plastic inserts are attached with a small screw into the window channel. This allows the window channels to catch and help slide the window up/down. I recently ordered part S380-21 (otion: 2040) 21" Series 380 Channel Balances for the exact same window, but didnt realize one of the two plastic ... (cont.)

Most of the shoes and some T bars need replacement

Do you have this wite glaze trim for a Ply Gem window ?

To whom it may concern. I require two spring assemblies and the two screws that mount the spring assy. Also, the two lower plastic assemblies. that

looking for this glazing bead

Windows springs for sears double hung windows. Also need lower 8lb.

I have a duplex with older crank out windows. Some need crank handles some need new arms I cant seem to find any info on Rimco brand. Any help would be greatly appreciated.I have removed the crank out assembly for the right side looking out of window.Its says LH unsure why but no numbers.If need mo ... (cont.)

N/A

Hello...I have a client who needs some windows fix. Can you help me with what exactly I need. Thank you

Looking for this item in MILL / Aluminum finish

The attached photos are for an operator on a Marvin window that a Truth motor broke -- the crank was broken out of its socket. It has two 8-inch arms, and appears to be EntryGard brand.

I previuosly ordered wheels, yet even though the wheels themselves were the apparent correct size, the side pins which clipinto the plastic assembly were a 1/4 " in diameter, and I need the small diameter pinned wheels where the diameter is 5/32 perhaps.

I need 10 stop rails, and I am not finding them and need your help, please.

Window brand is Radiance. The sash weighs about 18lbs. There are letters a-f vertically on the plastic piece. To the side is a F. The other side just has pat pend.