Viewing all customer Discussions for:

Door & Window

The rollers are attached on the corner ends of the patio screen door. Remove the screw that attaches the wheel housing and install the new with the existing screw. The screw that comes with this roller is the adjusting screw; the adjusting screw will raise and lower the wheel inside the roller hou ... (cont.)

Searching for 2 30270 Looking for casement window locks the crank is a truth so I would believe the lock is also

The holes are not 3-15/16, but are 3-7/8. The outside handle needs to be totally flat to clear the screen door.

Here is the number on the crank handle: 45012. It's the only identifying number I can find.Hi!I have eight awning type windows in my bedroom that are at least 20 years old. One of the windows has a stripped crank. I noticed this a few months ago, and I was able to shut the window from the outside, a ... (cont.)

Hi I am trying to identify the attached spring balance which is a triple. The length of the top sash is 36" and the lower sash is the same. The coil balance support is approx. 5" high, 7/8" wide (inside track) and 1/2" deep (track/jamb). I hope this information is helpful in identifying the parts ... (cont.)

Having trouble finding the latch. Both of them broke off so had to drill a hole and put screws in it to get it to work. The serial number for the storm door is 0016931662. Thanks for the help!

Looking for a keyed sliding glass door handle set in white. Current handle appears to be a Legacy. Latch lever measures 4.25" from top of handle. Number inside current handle is 2265. Would like it keyed for Kwikset key if possible. Can existing handle be fitted with lock via one of the knockout ... (cont.)

From 1971 mobile home. Door is still good but rollers are really chewed up. Hope you can help. Thanks!

Looking for the bars that mount to the bottom of the double hung sash.

Good morning , I need some help with finding this item in your catalog. I don't know the window name .

Hi, I need 2 brand new side window balance's for my 15 year old Simonton windows. I have included the window manufacture sticker that is on the upper right hand side of the window. I can not find any markings on my existing balance. I believe with the sticker you should be able to see or have what I ... (cont.)

Looking for theses tilt locks,Don't Know the manufacturer,Made around 1990 or so! white aluminum single Hung! Thanks!

Can you please identify this part and tell me if the is a right and left. The on black plastic piece has been damaged both the right and left side of the window. Thank you very much for your help.

Do you know what will replace these?

Do you guys carry this part? I've looked and see some similar parts, but can't quite find this one. I only need 2 (a right side and left side- if there is a difference). If you don't carry it, could you point me in the direction of someone who does? Thank you for your help.

Metal loos like steel five little balls

My tube measures 28 1/2 inches and my tip color is white so what can I use

Are the rollers always just on the bottom of the door or are they also on the top as well? I've loosened the bottom roller on one side, but I don't see a similar access hole on the bottom of the other side of the door. There is an access hole on the top of the same side as the bottom. Unfortunatel ... (cont.)

40-150, What does the latch close onto? The old latch used a spring loaded vertical bar about 2" long and about 1/8" in diameter. Is it supposed to be solid? Thanks

Hello, I have two bedroom windows that won't remain open. I believe the spring mechanism is broken on both. There are no names, numbers, or markings on the piece. It was enclosed in a plastic sleeve. The attached photo shows the spring outside the sleeve. It's just over 29" in length. The windows ... (cont.)