Viewing all customer Discussions for:

Door & Window

The coil its self has 406 on it and i think i have found it on your web page but i do not see the balancer.. It has no # on it but it is 1 1/4" wide, 7/8" thick 1 3/8" tall... Can you help me

need 10 of these keepers. hole centers 2 1/16. Hoping to get them without the locks as the locks are fine. Thanks Paul

Hello, I have a customer that wants me to make her some window screens. The only issue is that her windows don

VANGUARD PAT # US 6672632

Hello, I have a 26" channel balance and there is only the markings of 26 5 and BSI as the manufacturer. There isn't an A, B, C, etc. The actual window size is 25 1/4 x 30 3/4 (double pane). From this information can you tell me which replacement balance I need to purchase?

I am having trouble finding the correct replacement parts for closet doors. I bought the following parts and they were close to what i need but most of them would not work. Im including the part numbers of what i bought and a description as to if the worked or not and what was different. 21-2 ... (cont.)

I require 11 pairs like This one and one pair of 24" marked 2330

I have a millgard window and need to order two new window balance. the window balance on the old window has a no.# 20 5 ku cmc 2.which swisco replacement do I need

I need two channel balance replacements for 24 4 GN Caldwell. I have identified them as Series 351 (25"), Top Guide 19-002, and Shoe 15-002, with the 2440 option (19-24 lbs.). Is this correct?

Trying to find balancer from my milgard double hung window. 9/16

Looking for replacement for this handle pair. From my research it seems similar to 40-184 here but I need a black/oil rubbed one and this is chrome. Do you think if I've found the right model for the replacement, and if so, any other colors? Thanks!

We've had these casement PGT windows for around 18 years. I've enclosed a photo of the existing locks. I haven't found any markings either. They're about 3 to. 3

letter k on back

Need assistance selecting stamp option. Balance I am replacing has the following as it's only marking... "29-4 DA2 CMC 7" Window is Dixie single pane, metal frame approx. 45" X 31" I have identified Series the 30" Series 385 channel balance as the part I need.

here is a spiral which I have on windows. do you have or know where a new one can be bought? this spiral was under tension. do you know of how or a tool to apply tension? do you know what kind of lubricant to use on this spiral? any info would be helpful. thanks.

I am trying to replace this door knob. I found you have Product Code: 40-035 and want to know if this would fit. If not what would fit. I would like to replace the whole set of parts ASAP since my storm door is blowing in the wind. Thank you. Jeannine

Hi this is a picture of the snap in window glazing I need. Thank you

I just finished talking with a customer service rep. I am interested in placing an order for a replacement balance bar. The length of the metal from one end to the other end is 29 in long. I have only one stamp on the bar which says 28 C. I believe that is the expansion for the spring. Attached ... (cont.)

Need patio door locks

I need a Grass 6600 drawer slide for a silverware drawer. The slide that attaches to the cabinet is 23" long. Do you know what part number this would be? and do you have it in stock?